The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old October 7, 1999, 12:40 PM   #1
Futo Inu
Senior Member
 
Join Date: February 12, 1999
Location: Oklahoma City, OK, USA
Posts: 3,624
I'm going to start reloading very soon, I hope, and I was wondering what powder would be the best/most versatile to buy in quantity for reloading 40s&w, .45acp, and 10mm? I want the best combination of good accuracy, but more importantly high vels for the pressures created, and application of those wants over a wide range of bullet weights with all 3 cartridges (from .40s&w with 135gr for defense to 10mm with 200gr for bowling pins). I realize that the answer would be much easier if it was just one cartridge, and the choice must of necessity be a bit of a compromise, as the characteristics of these cartridges are conducive to different best all-around powders; also, the choice would probably be much easier if 45 was eliminated from the mix. But considering all three, I was thinking of HS-6, based just on looking at reload manuals. And, would your answer change if you ALSO threw in 9x19P (which I may want to reload at some point, too)? Also, would your answer change if price was a factor? Thanks in advance.

[This message has been edited by Futo Inu (edited October 07, 1999).]
Futo Inu is offline  
Old October 7, 1999, 01:46 PM   #2
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 14,503
That's a fairly wide range of requirements for just one powder to fill. I'm going to add one more factor, metering accuracy/consistency, and cast my vote for Accurate #7. For some of the loads you described, it will be the top choice especially in 10mm. For others, it is seldom less than a medium choice. And you can often find it on sale (like this month at Natchez).
Mal H is offline  
Old October 7, 1999, 01:47 PM   #3
10mmrules
Senior Member
 
Join Date: July 29, 1999
Posts: 140
Futo,
I reaload all three with Titegroup. it gives the best accuracy, and power also. But I also like power pistol in all three. then again I have used w231 in all of them with success. I guess titegroup is the winner.

------------------
10MM Magnum.... tried the rest, now I got the best
10mmrules is offline  
Old October 7, 1999, 02:13 PM   #4
Futo Inu
Senior Member
 
Join Date: February 12, 1999
Location: Oklahoma City, OK, USA
Posts: 3,624
Ahhh, metering consistency/accuracy. Any other factors to consider? And what about Unique?
Futo Inu is offline  
Old October 7, 1999, 03:02 PM   #5
JoeHatley
Senior Member
 
Join Date: July 1, 1999
Location: Iowa
Posts: 2,135
Futo,
http://recipes.alliantpowder.com/

Bullseye(my favorite) works with most bullet weights in all 3 calibers.

Good Luck...

Joe


------------------
Go NRA
JoeHatley is offline  
Old October 7, 1999, 04:33 PM   #6
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,213
Based on your desired performance criteria, I highly recommend Alliant Power Pistol.

Burn rate demands slower powder, eliminating Bullseye, Titegroup, W231. Accurate AA7 is a decent choice, but I believe Power Pistol is the BEST choice.

Skip Unique. If you want a powder like that try Hodgdon's Universal Clays, a modern clean easy-metering alternative to Unique (and almost EXACTLY the same burn rate).

------------------
"All my ammo is factory ammo"

WESHOOT2 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06517 seconds with 9 queries