The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 11, 1999, 07:03 PM   #1
chink
Senior Member
 
Join Date: November 11, 1998
Location: saratoga, ca, usa
Posts: 806
I just recently got into the gun thing, and I will be getting my 1911 this friday, but 45 acp is expensive, but I intend to shoot it often. And I figure I have all kinds of .223 brass from my ar sitting around. So i figure I'll reload at least some of it.

anyway, the question, who do i need and what kind of overheard are we talkin here. I'm a not so poor college student, so money it tight
chink is offline  
Old May 11, 1999, 10:27 PM   #2
Art Eatman
Staff Lead
 
Join Date: November 13, 1998
Location: Terlingua, TX, USA
Posts: 22,540
Search the archives; we've been through this before.

Me, I'd hunt for a good used C-Press at a gunshow, or maybe the world of Thrifty Nickels. If you see a gun ad, ask if they have "stuff".

For those two cartridge, I'd get carbide dies.

I prefer beam scales over electronic, but it's just my attitude. And used ones work as well as new, in my experience.

Browse some of the books at a gun store, and ask questions in the reloading components section of the store...

After 50 years, it's still a ton of fun!

Good luck, Art
Art Eatman is offline  
Old May 12, 1999, 10:12 AM   #3
fal308
Staff Alumnus
 
Join Date: October 12, 1998
Location: Missouri
Posts: 1,986
Lee sells a kit that has everything you need to get set up - www.leeprecision.com - or contact Dillon www.dillonprecision.com for phone numbers. Dillon will give you the straight scoop. They won't sell you something just so they can make a sale. They have, in my opinion, the best customer service in any industry bar none.
fal308 is offline  
Old May 16, 1999, 10:27 PM   #4
Bill Hebert
Senior Member
 
Join Date: May 15, 1999
Posts: 180
I've been there- done that.. Send me your 223 brass and I'll give it a good home... Seriously, I started with a $15.00 Lee press and a Lee reloading manual. You will need the set of dies (for a 223 they cost about $20 for non carbide) a can of powder $20 and your bullets (I just bought 2000 for $58) and your brass. You'll need a scale - approx$30-$50 for a beam type and a set of calipers to measure the overall length of the brass and cartridge ($20). Primers cost $3.00/hundred at a local store. A case length guage will cost $20 - in the beginning just throw away the brass that has stretched too much. Later get a case trimmer.. If you shoot more than 500-1000 rounds every three months or so, I say get into reloading. Honestly, I love reloading and have spent about $400 in six months. But I now reload 9mm, 38 specials, 357 mags, 308's and 223's. If you are a person who does not take responsibility for your actions - do not get into reloading - get factory cartridges. Then if something goes wrong you can blame someone else. I was at the range today and I heard a fellow say he had "problems" with his reloads not chambering -so now he only buys new cartridges. Thank you very much - I scarfed up his throw-away 308 brass. Good luck and happy reloading and/or shooting.
Bill Hebert is offline  
Old June 4, 1999, 09:47 PM   #5
Don Morgan
Member
 
Join Date: June 2, 1999
Posts: 43
Go to this Web Page Top Ten Firearms

http://pages.hotbot.com/sports/zoff12/index.html

Go to Articles; I wrote an article titled What Do I Need To Begin Reloading

Don
Don Morgan is offline  
Old June 7, 1999, 09:19 AM   #6
muddyboots
Member
 
Join Date: March 12, 1999
Posts: 47
Bill
You don't really pay $3 a hundred for primers. Ouch! if I have to pay $15 a thousand I think that's painful. I try to buy at shows $13 a thousand (I bought some about 6 weeks ago). The last time I bought primers couple years ago I paid $10, never could figure how they could sell them that cheap.
muddyboots is offline  
Old June 10, 1999, 09:15 PM   #7
HankL
Senior Member
 
Join Date: March 11, 1999
Location: The Sunny South
Posts: 2,174
Bill Hebert said it all! "If you are not responsable for your actions"
In my HO this has become a major cause of the fall of the American Republic!
Hank
Just Hank
HankL is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07343 seconds with 9 queries