The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 7, 1999, 03:48 PM   #1
bookkie
Senior Member
 
Join Date: March 5, 1999
Location: Arbuckle, CA, usa
Posts: 1,269
OK here's the story… I work for a winery in CA. Back in 94 the feds banned the use of lead foils on wine bottles. At the time we got stuck with a considerable amount of inventory that we could no longer use. Since we can't use them any longer we have to dispose of them. They are now classified as a hazardous waste. To expensive to pay someone to take them so I came up with the idea of giving them away to sportsmen to make bullets out of. Since I roll my own, I thought I would try the idea out first. First I had to smash the foils down to get them to fit into my lead pot. When I put them in they smoked considerably since they are covered on the outside with paint. I would suggest only melting them out of doors. Don't know if the fumes are toxious or not. Once melted the paint is burnt off leaving an ash on top of the melt. It is an easy matter to skim this off. What is left is a real nice mixture of lead/tin. Don't know what the exact mix is but I estimate it at 10-20% tin and the balance of lead. I put in my normal pea size bit of beeswax to purify the mixture, but it did not bring anything else out. It appears that the lead is a high quality. Must be to be used in foils. I made up a couple dozen rounds and took them down by the creek and shot them. I got absolutely no lead fowling from these. The bore was almost as clean after as before, except for a little from the powder. I rate the accuracy as very good.

The foils come boxed 50 lbs to the box, 15 boxes to the pallet. We currently have about 3 pallet's left (after I took one). If anyone wants some, pay for the shipping and their yours. E-mail me & I'll make arrangements. These foils work far better for casting than do wheel weights.

Thanks,

Richard
Bookkie@yolo.com


bookkie is offline  
Old April 8, 1999, 04:59 PM   #2
Rew
Member
 
Join Date: March 3, 1999
Location: Colorado Springs CO. USA
Posts: 36
bookkie, I am very intrested, can you give me an idea on what it would cost to send 2 box's to Colorado Springs, CO.?

Rew
Rew is offline  
Old April 15, 1999, 06:16 PM   #3
Cheapo
Senior Member
 
Join Date: November 19, 1998
Posts: 986
Hey, give us an accurate per-box weight (like include the box weight) and we can compute our own UPS shipping on their web site!

I'm interested, too.

Thanks!
Cheapo is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:59 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05655 seconds with 7 queries