The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 14, 1999, 05:47 PM   #1
STEVE M
Senior Member
 
Join Date: February 7, 1999
Location: TN. USA
Posts: 607
Does anyone have a favorite load with 150GR bullets? I've been working with Sierra 150 and Hogdon 380 but haven't found a good load yet. Any help would be welcome.
STEVE M is offline  
Old March 16, 1999, 08:10 PM   #2
HESENWINE
Junior Member
 
Join Date: March 16, 1999
Location: BRISTOL, TN, USA
Posts: 3
Try H-414. I just got a new Savage Scout Rifle in 7mm-08 & I'm having good luck w/ the 414. It's a ball powder so it measures well in my RCBS measure. Haven't used the chrono yet but intend to do so this weekend.

------------------
Harry
HESENWINE is offline  
Old March 20, 1999, 10:35 AM   #3
RJ in Rome NY
Member
 
Join Date: March 7, 1999
Location: Rome, NY, USA
Posts: 16
I may get flamed for this... but..
Try finding a powder that when the case is charged with a "reasonable" load , the powder comes up to bottom edge of the shoulder.. There is something to be said
for uneven , inconsistant , pressure curves
resulting from uneven ignition of the powder
due to the primer flash going across the top of the powder in the case.. which.. depending which way you held your gun upon loading the cartridge would determine how the powder lays in the case which affects the primer flash /
pressure curve which can affect velocities which in turn can affect your accuracy.. PHEW ! Lastly.. the highest velocity isn't always the most accurate.. cheers
RJ in Rome NY is offline  
Old March 20, 1999, 10:39 AM   #4
RJ in Rome NY
Member
 
Join Date: March 7, 1999
Location: Rome, NY, USA
Posts: 16
oh BTW.. I almost forgot..
I use H-322 in my 7MM BR which is a
shortened .308 case.. and I also use
it in my 7 mm TCU and find it very accurate
in both.. in that cartridge tho.. probably
a little bit slower powder like H -335 or BL-C(2) ... Now that I think about this.. it does seem that the ball powders are more accurate for me... anyone want to comment on that thought .. I'm curious now...
RJ in Rome NY is offline  
Old March 20, 1999, 03:56 PM   #5
HankL
Senior Member
 
Join Date: March 11, 1999
Location: The Sunny South
Posts: 2,174
Steve, If you have any IMR 4350 around you should give it a try. Using Remington brass I have been loading 140 gr. Ballistic Tips using 46 gr. of IMR 4350 and Federal 210 primers. My little model 7 loves this. Good luck with the 150's. Hank
HankL is offline  
Old March 22, 1999, 02:10 AM   #6
Menos
Senior Member
 
Join Date: March 21, 1999
Location: VA
Posts: 163
Take a look at AA2031br powder , designed for small cases, but works very well in small bores , its a smaller rod type powder , but burns very evenly and you can fill up the case even with lighter bullets .
Menos is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07033 seconds with 7 queries