The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 8, 1999, 05:46 AM   #1
bk40
Senior Member
 
Join Date: January 12, 1999
Location: Mississippi
Posts: 1,004

Which V-V powder(s) would be the best all around choice for these loads?

1. 9mm: 115gr-125gr JHP & FMJ
2. .40: 135gr-155gr JHP & FMJ
3. 45acp: 200gr-230gr JHP & FMJ
4. 45acp: 200gr-230gr LSWC & LRN

I'm trying to stay with one powder but I realize sometimes 2 burning rates are needed to maximize efficiency with different calibers/pressures. So, help me select the best powder(s).
Thanks!
........... bk40
bk40 is offline  
Old March 8, 1999, 11:07 AM   #2
fal308
Staff Alumnus
 
Join Date: October 12, 1998
Location: Missouri
Posts: 1,986
I'm sold on VitaVhouri powders. 340 would probably be my choice for only one powder for all three, though right now I've got 4 lb of 350 (along with some 110, 130 & 133). I use the 350 in loading 45. Never owned a 40 so i've never loaded for that.
fal308 is offline  
Old March 9, 1999, 11:54 PM   #3
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,242
Try N350 or 3N37 (I prefer 3N37)
WESHOOT2 is offline  
Old March 12, 1999, 03:59 PM   #4
Dan C
Member
 
Join Date: October 27, 1998
Location: Seattle, WA USA
Posts: 18
I really like N340 for the 40. Seems to work well for all bullet weights. I have not tried N350 yet...

Dan C is offline  
Old March 15, 1999, 11:01 PM   #5
Michael Carlin
Senior Member
 
Join Date: October 13, 1998
Location: Fredericksburg, VA USA
Posts: 193
IMHO opinion N350 and 3N37 are too slow for effective use in the 45 and 40.

I have no experience with the 40, lots with the 10mm (da 10 be da ONE!!!).

I would recommend N320 or N340 for 45 acp the faster powder with the lighter bullet.

I you have to use one powder, N340 seems the most likely candidate.

Be sure to follow the most recent VV data! Start at the recomended starting load and work up paying attention to accuracy and pressure signs. Even w/o signs do NOT exceed the maximums listed.

------------------
Ni ellegimit carborundum esse!

Yours In Marksmanship
http://www.1bigred.com/distinguished

michael

Michael Carlin is offline  
Old March 20, 1999, 08:48 PM   #6
ga41
Member
 
Join Date: February 18, 1999
Location: thomaston,ga USA
Posts: 17
There was a good article on the 40 SW a couple of yrs ago and N350 was highly recommended
ga41 is offline  
Old March 20, 1999, 08:50 PM   #7
ga41
Member
 
Join Date: February 18, 1999
Location: thomaston,ga USA
Posts: 17
Additionally N350 gave the highest velocity out of the 45 in the VihtaVuori book

[This message has been edited by ga41 (edited March 20, 1999).]
ga41 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:55 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07059 seconds with 9 queries