The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 23, 1999, 12:14 PM   #1
bear
Member
 
Join Date: November 13, 1998
Location: Mpls, Minn
Posts: 56
Just got a rcbs X die for .223 price was right free, but no instructions, anybody familiar with this die and whats it for, it looks like a sizing die.
Thanks much, Al
bear is offline  
Old January 23, 1999, 05:42 PM   #2
Walt Welch
Senior Member
 
Join Date: November 3, 1998
Location: Alamo, CA
Posts: 424
I suggest you send it to RCBS in Oroville, CA. They can positively identify it for you. It seems that I recall the existance of various type dies in semi-auto cals. I believe these were termed 'small base' dies, the idea being that they sized the brass down smaller at the base so it would feed reliably in semi-autos. These type dies would over size the brass for bolt actions.

Thus, it seems to me you need a qualified opinion on just what it is you have. Walt
Walt Welch is offline  
Old January 23, 1999, 06:11 PM   #3
swehrman
Member
 
Join Date: October 10, 1998
Location: Kalispell, MT. USA
Posts: 26
As I recall it is a sizing die that supposedly resizes cases in such a way that case trimming is virtually eliminated. I would give RCBS a call and ask for the instruction manual. They'll probably ship it to you for free.
swehrman is offline  
Old January 23, 1999, 10:13 PM   #4
Steve H in AZ
Junior Member
 
Join Date: January 23, 1999
Location: Tempe, Arizona, USA
Posts: 2
bear,

Just got one of those X-dies myself in .223. Haven't used it yet, but what it does, is it stops the growth of the fired case. You must trim your brass prior to using the X-die, but the instructions say that it is the only time you will have to do this. Call RCBS, and they will send you the instructions. They are excellent about that.

Don't know there number off the top of my head, but it is an 800 number, check a gun magazine.

Steve H in AZ
Steve H in AZ is offline  
Old January 25, 1999, 07:30 PM   #5
bear
Member
 
Join Date: November 13, 1998
Location: Mpls, Minn
Posts: 56
Thanks much to all, will call RCBS.
bear is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:31 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05970 seconds with 7 queries