The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 22, 2006, 12:57 PM   #1
OneInTheChamber
Senior Member
 
Join Date: December 12, 2005
Posts: 789
Component ?'s from a Noob

Hey guys, I ordered a MEC steelmaster press in 20 gauge last night and a lyman's reloading book from midwayusa.com.

As far as powder, primer, etc. goes I have a few questions

1. How many rounds will 11lb. of 7 1/2 shot make? (I calculated 201 rounds using 7/8 ounce of shot). Is that the way to do it? Cause at $30 for 11lb's (201) rounds doesn't sound to cheap when you add on the wads, primers, etc.

2. I have started to save my Remington gun club spent hulls. Are these any good? Or do I need to buy the Winchester AA's?

3. What is the difference between lead and steel shot? I'm just shooting clays if that helps. Will steel hurt my shotgun?

Thanks

Chase
__________________
Insert witty, comical, and/or significant quote here.
OneInTheChamber is offline  
Old January 22, 2006, 01:12 PM   #2
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 11,285
Well, let's see, there are 16 ounces in a pound, 176 in 11 pounds. Divide 176 by .875 and get 201, you are right.

Who sells shot by the 11 lbs? All the birdshot I have ever bought was in 25 lb bags. $30 for 11 lbs is a lot, Gamaliel sells chilled (cheap, ok for skeet) shot for $17.75 a 25 lb bag. Surely a local store or skeet club will have it trucked in for not too much freight.

Remington Gun Club hulls are ok for a few loadings, the STS target shells will last longer. AAs went to a two-piece design and are not as well thought of as they used to be.

Use lead shot wherever allowed. Which is basically for everything except waterfowl most places. Some repressive jurisdictions are banning lead on claimed environmental grounds but really because they are anti gun.
Steel is more expensive and requires special wads to protect the barrel.
Jim Watson is offline  
Old January 22, 2006, 06:51 PM   #3
Ruger4570
Senior Member
 
Join Date: April 3, 2005
Location: Rochester, New York
Posts: 2,136
Maybe I misunderstood... if all you are shooting is Sporting Clays... why would you be shooting "steel shot??" I have never heard of a club that required steel for clay targets of any kind. Also in the event I misunderstood again, if you are shooting waterfowl.. why would you want to use a 7/8 oz load? The 20 will shoot a lot more and up your patterns and chances.
Ruger4570 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06606 seconds with 7 queries