The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 16, 2006, 12:32 PM   #1
BIGJACK
Junior member
 
Join Date: October 8, 2005
Location: Pell City, Alabama
Posts: 287
Winchester Factory Loads.

I pulled up a web site the other day that had specific data for Winchester over the counter ammuntion loads. I cannot find it again. Will some one please help. I get the winchester sited and what comes up is not what I had the other day. I am specifically looking for the 100gr loads for .243 win. Help will be appreciate. Thanks.
BIGJACK is offline  
Old January 17, 2006, 05:27 AM   #2
shero
Junior Member
 
Join Date: October 29, 2005
Location: perth western australia
Posts: 14
does this help ??

jim


http://www.winchester.com/products/c...ype=1&action=1
shero is offline  
Old January 17, 2006, 08:40 AM   #3
BIGJACK
Junior member
 
Join Date: October 8, 2005
Location: Pell City, Alabama
Posts: 287
Naw! but thanks anyhow. I have looked all over the winchester.com site and it is just not there. What I want is the specific charges for different velocities. I have a rifle that shoots the 100 gr winchesters pretty good and I found the site once and it showed 44 grs of win760 along with other loads for different velocities. I am tryhing to get down to about 28-2900 fps witht he 760 since the rifle shoots PMC 100grs exceptionally well but I understand that they are going out of business. I ask um about it on their site and they have not responded so I assume it is right. Thanks anyhow shero, have a nice day.
BIGJACK is offline  
Old January 17, 2006, 10:34 AM   #4
Countertop
Senior Member
 
Join Date: September 7, 2004
Location: At the diner
Posts: 125
Can you even purchase the powder winchester uses?

(pardon me if this is a dumb question, I just got reloading equipment and reloaded my first batch of handgun ammo this weekend).
Countertop is offline  
Old January 17, 2006, 11:01 AM   #5
BIGJACK
Junior member
 
Join Date: October 8, 2005
Location: Pell City, Alabama
Posts: 287
In the case that I am interested in the answer is yes. I found the table before and it showed Winchester Ball 760 as the powder used and how much, along with the other data such as velocity, for the cartridge that I was shooting.
BIGJACK is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07195 seconds with 9 queries