The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 29, 2000, 01:53 PM   #1
bone
Junior Member
 
Join Date: January 1, 2000
Posts: 10
Can anyone tell me how to get to and adjust the target trigger on this varmint rifle? Thanks for any input. bone
bone is offline  
Old February 2, 2000, 10:42 PM   #2
weegee
Senior Member
 
Join Date: November 24, 1999
Posts: 195
bone, I'm pretty sure the trigger in question is non-adjustable. It's a different design (two-stage, and lighter pull) than the regular mk.II trigger. I think you can find more info in Frank de Haas' book "Bolt Action Rifles", or perhaps the moderator knows more than I...
weegee is offline  
Old February 3, 2000, 09:02 AM   #3
George Stringer
Staff Alumnus
 
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
Bone, WeeGee is right. The Mark II trigger is not adjustable. I've reworked several of them but this isn't a "adjustment screw" job. I recommend you take it to your local smith for a trigger job. If you don't have anyone near you, feel free to e-mai me. George
George Stringer is offline  
Old February 3, 2000, 10:29 PM   #4
Art Eatman
Staff Lead
 
Join Date: November 13, 1998
Location: Terlingua, TX, USA
Posts: 22,583
I bought a regular MkII in .223. Didn't know about the tort-liability trigger. After I quit throwing up, I put in a Timney. It's not as good as a Canjar, but it was reasonable and easy--and it ain't a bad trigger at all. A little bit of careful grinding for the safety to clear.

FWIW, Art
Art Eatman is offline  
Old February 4, 2000, 04:33 PM   #5
slabsides
Member In Memoriam
 
Join Date: May 27, 1999
Location: Maine
Posts: 614
The VT version of the Ruger Mk II does have an adjustable two-stage trigger. My pard's gun came from the factory with it perfectly adjusted, 2nd stage 2.5 lbs and no backlash or 2nd stage creep. Ruger discourages your messing with their triggers due to liability questions, but it is possible to adjust the old 77's (ones with the tang safety) and the VT (dark stainless HB laminated.) The standard Mk II trigger has the same adjustment capabilities as a standard crowbar, i.e.: none.
slabsides

------------------
If they take our guns, I intend to let my hair grow long and acquire the jawbone of an ass.

slabsides is offline  
Old February 4, 2000, 10:49 PM   #6
MontaniSemperLiberi
Member
 
Join Date: January 10, 2000
Location: South Charleston, W.Va. USA
Posts: 42
There are spring kits, trigger kits, etc. available through Brownell's for the Ruger 77MKII. Unless skilled/practiced,etc. with the funtion of the Ruger trigger, would suggest having 'smith install. As mentioned, I happen to like the two stage V/T trigger Ruger offers.
MontaniSemperLiberi is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:30 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06616 seconds with 9 queries