The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 27, 2000, 05:41 PM   #1
kjm
Senior Member
 
Join Date: December 24, 1999
Location: College Station, Texas
Posts: 1,871
The bolt on my Remington Model 700 slides all the way out when cycled. Isn't there supposed to be some sort of stop, and is this a common problem? I'd like to fix it myself if I can.
kjm is offline  
Old January 27, 2000, 05:50 PM   #2
CrowShooter
Member
 
Join Date: January 19, 2000
Posts: 44
KJM,

There is a bolt stop, it is released/operated by the flat button on the inside top of the trigger guard. Sometimes too much oil, weak spring, burrs, etc., can cause the stop to stay in the release position. A bit of a jiggle on the release button can cure this, but sometimes you may need to push it down with a screwdriver or something. The bolt stop is at the rear of the action on the left side. A drop of oil on each side of the stop may help.

If you bought it used, it is possible that it is not there.

Let me know if this fixes it.

CS
CrowShooter is offline  
Old January 27, 2000, 05:57 PM   #3
kjm
Senior Member
 
Join Date: December 24, 1999
Location: College Station, Texas
Posts: 1,871
Thanks CS, It's fixed! Appreciate your help.

kjm
kjm is offline  
Old January 27, 2000, 06:01 PM   #4
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,282
Take the action out of the stock. You can then see the bolt stop and observe it working. It is probably stuck in the down position, perhaps due to oil, grease, or rubbing on the stock. The spring may be broken or missing, also.

Be careful putting the action back in the stock, you can crack the stock on the ADL model if you let the magazine spring get caught under the magazine box.

Jim
James K is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10498 seconds with 9 queries