The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 22, 2000, 09:55 PM   #1
oberkommando
Senior Member
 
Join Date: September 25, 1999
Posts: 1,157
Found one at gun store going out of business and cant find any numbers on frame except one (7) near the locking lug area on inside area of frame and the letters H AND G near back on top frame area though none are in a row there are just these three symbols. Slide is marked I belive Colts model 1911 Army or some such thing with the horse behind the slide cutts. The other side of slide has two or so patent numbers one dating late 1800's I believe and the other 1913 (or 18) Was told the frame cannot be sold with out serial number. Does not appear to have ever had one. Disassembled down to bare frame all parts save ejector and plugertube and cannot find any other numbers. Can buy for about 125 is there any way to purchase and still make it worth while financially. Too much to send to colt and dont know how much the ATF charges to assign a number?Shouldn need a damn number!
oberkommando is offline  
Old January 22, 2000, 10:14 PM   #2
George Stringer
Staff Alumnus
 
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
Oberkommando, I came across one of those in the early 70s. I did a little research on it and found out that it was probably a "lunch pail" .45. These were guns that were taken home piece by piece a'la Johnny Cash's Cadillac in lunch pails by workers during WWII. Your's might very well be one of those. George
George Stringer is offline  
Old January 22, 2000, 11:12 PM   #3
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,445
It is not illegal to own or sell a gun without a serial number. Thousands of guns were made without serial numbers pre-1968 and they are legal to own and sell.

It is illegal to own a firearm from which the number has been removed or altered. With that gun, it could be hard to convince anyone that the gun never had a number.

Jim
James K is offline  
Old January 23, 2000, 06:53 AM   #4
Jim V
Senior Member
 
Join Date: January 31, 1999
Location: SE Michigan - USA
Posts: 4,038
I had the chance, which I passed on (insert sound of head being bounced off a wall here) , to purchase a "sterile" 1911A1 from the estate of a former FBI Agent. He had been issued the pistol during WWII. I detail stripped the pistol and there were no marks to be found any where on it.


------------------
Ne Conjuge Nobiscum
"If there be treachery, let there be jehad!"
Jim V is offline  
Old January 23, 2000, 12:46 PM   #5
Paul B.
Senior Member
 
Join Date: March 28, 1999
Location: Tucson, AZ
Posts: 2,633
I saw one 1911A1 type .45 at a gun show with absolutely no markings at all. I asked the man selling it if it was a "lunch pail" gun. He said it was not. Told me they made some "sterile" guns for clandestine work. I would have bought it, but the price was almost enough to buy a late model used car. It was interesting to look at though.
Paul B.
Paul B. is offline  
Old January 23, 2000, 04:34 PM   #6
John Lawson
Senior Member
 
Join Date: August 28, 1999
Posts: 281
South American 1911-A1 pistols made under Colt License had only one serial number on the pistol, on top of the slide. Change slides, and no serial nuimber. The early Colt slides interchanged perfectly.
It seems that BATF neglected to notice this and allowed some of these pistols to be imported on the surplus market in the '60's.
(Later ones had to have the serial number stamped into the frame in the usual manner.)
My goodness, how strange tales abound to elevate the price of some rather common early Colt style pistols from Argentina!
When you are at a gun show, and some shyster lays this kind of crap on you, demand to see some provenance (written proof) of his fantastic tale.
When I was in the Ordnance Corps I saw a large number of pistols used in covert operations; all of them had serial numbers.
If you find one without serial numbers, usually an application of hydrochloric acid will bring up the original number that some unnamed person or agency has obfuscated.
The only unnumbered ones we saw were made by
machine shops in North Korea and some much later from North Vietnam. In every instance, they were very poorly made specemins.
John Lawson is offline  
Old January 24, 2000, 02:55 PM   #7
oberkommando
Senior Member
 
Join Date: September 25, 1999
Posts: 1,157
Called K-DOJ and the lady form firamsdivison said the handgun must have serial number to be sold, unless it is an antique. She said that I would have to call the manufacture. This is kind of hard as there are no manufacture data on frame. Guess that is the gun buyers problem. Hold time calling colt is 45 minutes and have to go to work now will call them later and see what they say.
oberkommando is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07054 seconds with 9 queries