The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old December 28, 2005, 03:11 PM   #1
jdm92584
Member
 
Join Date: August 25, 2005
Posts: 52
shotgun reloading

i got a 12ga press and a bunch of hulls what else do i need? im pretty sure i need something else to crimp em closed right?
__________________
"shoot straight and dont trackem"my dad
my toys
bulgarian makarov in 9x18
mossberg 695 sluggun in 12ga
remington 760 in 30.06
ted williams edition polychoke 12ga pump from sears
yugo sks
remington model 81 semiauto 35
44bp by traditions
54 bp rifle by traditions
nef .410 i got at 12
22 stevens
marlin model 60 22
35 leveraction marlin 336
jdm92584 is offline  
Old December 28, 2005, 10:34 PM   #2
Smokey Joe
Senior Member
 
Join Date: July 14, 2001
Location: State of Confusion
Posts: 2,064
Your needs

Jdm92584--for reloading shotshells, the first thing you need is KNOWLEDGE. Shotgun loads are notoriously sensitive to any change in powder, hull, primer, shot weight, anything. And in a shotgun, with its thin bbl, the last thing in the world you want is a KABOOM.

So before you go buying more "stuff," IMHO you need to buy a loading manual, and a book called The ABC's of Reloading. It's also very helpful if you can find an experienced reloader in yr area who can help you with puzzling questions--But don't use his word-of-mouth recipie: Get one in print.

Lyman's Shotshell Reloading Handbook is good for recipies; there are several others. The ABC's is not a recipie book, it is a how-to and more importantly why-and-why-not-to kind of reference. Get both of 'em @ yr local sptg gds sto, a gun show, the I'net, or the ABC's from the publisher at www.krause.com The ABC's is now on its 7th edition--They must be doing something right. (But if you find an old 6th edition, that one is good, too. No experience with the earlier eds.)

You'll need powder, wads, shot, and primers in addition to yr hulls, but the exact hulls you have will dictate WHICH wads you have to use, and yr intended use will dictate which shot size, and the 2 of those will dictate which powder and primer work with the load you need in the hulls you have. That's why you need the reference books.

BTW, if you have a normal shotshell reloading press, it will have a crimper to close the shells over the load, no need for anything else there, depending on which piece of equipment you do have. If a manual for using the press didn't come with it, get one of those from the manufacturer. It won't help you with the recipies nor the how-to of building shotshells, but it will help you get your particular press set up correctly, so's it works right, which is just as important.

Unfortunately, like most human activities, there is more--much more--to reloading shotshells than meets the eye at first glance. It's not rocket science; I'm not suggesting that you not do it, but I am urgently suggesting that you need to know more about it before starting.

FWIW, welcome to The Magnificent Obsession--Reloading! You're never done learning, and there are no masters--only students at various levels. Proceed carefully, ask questions, enjoy!
__________________
God Bless America

--Smokey Joe
Smokey Joe is offline  
Old December 28, 2005, 11:00 PM   #3
6mm4me
Member
 
Join Date: November 30, 2004
Location: kansas city area at the present, but Colorado and Wyoming have been home. Lived 2 years in the middle east.
Posts: 33
before you crimp them

You need to know what and how much goes into them. First thing you need is a loading manual, then powder, wads, primers and shot. Then you can crimp them, and I bet the press is set up to do it "as is"
6mm4me is offline  
Old December 29, 2005, 01:20 PM   #4
snuffy
Senior Member
 
Join Date: May 20, 2001
Location: Oshkosh wi.
Posts: 2,779
slug loads?

If you're talking about slug loading, and you want to roll crimp, then you will need another crimper,(roll crimper). If you just want a normal star crimp, then the press you have will be set-up to do it. Most have provisions for both a 6 point and an 8 point crimp.

Definetly get the Lyman shotshell handbook. If your press is the 600 mec, then it will be the best bet, because they use the 600 as the example in their how to section.
__________________
The more people I meet, the more I love my dog

They're going to get their butts kicked over there this election. How come people can't spell and use words correctly?
snuffy is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05977 seconds with 7 queries