The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools
Old December 26, 2005, 02:12 PM   #1
zippyfusenet
Senior Member
 
Join Date: July 19, 2005
Posts: 158
Should I Buy a Taurus 94?

I'm looking for a small frame .22 target revolver that shoots good and doesn't cost a lot. I want a stainless steel finish, a 4 inch barrel and a 9 round cylinder. I plan to use the piece to cheaply practice double-action revolver shooting.

I like the looks and specs of a Taurus 94, but I've never shot one. It looks like I can get one lightly used from an internet ad for about $300, including shipping and local FFL fee.

I've read a lot of posts on this board from people who think well or badly of Taurus firearms. This time I'd like to hear specifically your Taurus 94 stories, and your opinion whether I should buy one of these guns or not.

Other models in my price range that I've looked at are the High Standard Sentinel and the H&R Sportsman, but these guns only come in blue finish, and I'm leery of buying such an old gun sight unseen from an ad.

S&W Model 63, Model 37, or a current J-frame with an aluminum cylinder and a long barrel would meet my spec, but cost more than I want to spend on a .22 revolver.

There's a stainless 4" Ruger GP101 .22, new in the box, for $450 with sales tax on display at my FLGS. Should I spend the extra cash and get the Ruger? It's just a trainer, I'd rather get a cheap gun.
zippyfusenet is offline  
Old December 26, 2005, 02:29 PM   #2
SteelToe
Senior Member
 
Join Date: June 17, 2005
Posts: 168
well

I have also heard of many people that love the Taurus brand. From what I understand it is their quality control that is lacking. But if you get a good gun from them it is a great gun. Even if you do get a dud it has a life time warranty to be fixed. I have also considered Taurus and while I may not choose one for my concealed carry (trusting my life to it) I would not hesitate in the least to get a 22 for plinking and perfecting my double action pull.

I would say go for it. That is just me though
SteelToe is offline  
Old December 26, 2005, 03:12 PM   #3
Puppy
Senior Member
 
Join Date: January 20, 2005
Posts: 265
Taurus's quality control has really improved ALOT in the last 15 years since I purchased my first Taurus revolver.

If you asked me 15 years ago would I ever buy another Taurus product I would have said probably not.

However in the last few years I have changed my mind and I currently have no problem buying Taurus products.
Puppy is offline  
Old December 26, 2005, 05:41 PM   #4
Sir William
Senior Member
 
Join Date: October 13, 2004
Posts: 3,261
NO, POJ. The 22 Tracker is better all around.
Sir William is offline  
Old December 26, 2005, 07:48 PM   #5
zippyfusenet
Senior Member
 
Join Date: July 19, 2005
Posts: 158
How big is a Tracker?

Thanks for the input guys. Sir William, isn't the Taurus Tracker built on a full size frame? I'm looking for a small frame .22 revolver, something about the size of an S&W J frame. This is a firm spec because my wife has small hands, and we're both going to practice with this piece. We have an S&W Mod 60 in the night table.

Curious, that the bigger Tracker .22 only has a 7 round cylinder, while the smaller M94 has a 9 round cylinder. I wonder what the reasoning is behind that?

Sir William, what exactly was your experience with the Taurus M94 that you call it a POJ?
zippyfusenet is offline  
Old December 26, 2005, 09:24 PM   #6
Sir William
Senior Member
 
Join Date: October 13, 2004
Posts: 3,261
The Taurus M94 suffers universally in poor extraction, bad timing, broken bolts, poor quality and limited durability. Mine did not last through a Wal-Mart brick of 22s. I returned mine the same day I purchased it. M94 #2 didn't fare better. I would not trust the M94 to function beyond 200 rounds. POJ. The Taurus Tracker series is larger, built stouter, more durable and AFAIK, reliable. I suggest it over the M94, H&R, IJ or a used alloy frame S&W. The Ruger SP-101 is good. The other choice to consider are the Commanches. I have had fair success with them. They prefer CCI Mini-Mags and they suffer extraction issues but, they function and are cheap. You get what you pay for.
Sir William is offline  
Old December 27, 2005, 12:37 PM   #7
zippyfusenet
Senior Member
 
Join Date: July 19, 2005
Posts: 158
Get the Ruger!

"Get the Ruger, zippy! The Ruger! The Ruger! Noooooooooo...idiot!"

Okay Sir William. After reading your post, and Maddog-Enigma's complaints on another thread, it seems like the Taurus M94 is a trouble-prone design, and best avoided. I'll pay more money for the Ruger, and get a reliable firearm.

Here's what wonders me. I can buy any number of decent .22 target semi-autos NIB for about $300. Why does a good .22 revolver cost half again more than an autoloader?
zippyfusenet is offline  
Old December 27, 2005, 01:06 PM   #8
Tacoma
Senior Member
 
Join Date: October 27, 2004
Location: SE New England
Posts: 613
Buy a used S&W 34 or 63. ( Your right, the new 317's are overpriced) These are common and about the same price as a new Taurus. The S&W will deliver better quality and value. ( i.e. You won't have to get on your knee's and beg to sell it for 50cents on the dollar should you ever need to. Been there.Done that.)

p.s. The Ruger Sp 101 would be my second choice. Mine was a VG shooter . it did need some cosmetic /action smoothening out of the box though. Nice guns overall but the one your looking at is about $20% overpriced IMHO.
Tacoma is offline  
Old December 27, 2005, 02:09 PM   #9
IM_Lugger
Senior Member
 
Join Date: June 27, 2004
Posts: 2,011
I like Taurus

but I wouldn’t recommend model 94, get a tracker if you want a .22
__________________
"I feel the Beretta is a great character, it's so strong and elegant. The other guns look dumb to me." - John Woo
IM_Lugger is offline  
Old December 27, 2005, 02:53 PM   #10
azredhawk44
Junior member
 
Join Date: September 28, 2005
Location: Mesa, AZ
Posts: 6,465
Your price for a used 94 is $50 more than I paid for mine new.

I got a 5" 94 that I have mixed feelings on. I paid about $265 after tax.

It is accurate enough. I had problems with the sights right off the bat, which is common with other 94 owners. The rear sight blade often comes loose from the factory. It also clamps from both sides with two independent screws. It is not a click adjuster. When you loosen on one side, you must tighten on the other.

Mine also can be hand-indexed. The lockup is not very strong. It takes about 20lbs of hand power to twist the cylinder while in lockup. I am sending it back to Taurus for work on that matter.

$150-$200 is a much more realistic price for one used.
azredhawk44 is offline  
Old December 27, 2005, 03:41 PM   #11
BigBoar
Member
 
Join Date: January 26, 2005
Posts: 51
To build a quality revolver takes about the same amount of work and cost whether a .22LR oor .357 mag. Hence, the cost of the Ruger and S&W. Some .22 autos can be built cheaper than large centerfires in that they can use a blowback action. The medium frame S&W 17/18 and 617s (SS) are really nice but you want a small frame so the SP-101 or 34/63 is what I would seek out. Ruger made 2 versions of the 4" SP: one with the full lug barrel and one with half lug. The half lug barrel seems to command a premium. There is also a 2+" version. I would look around to see how prices are. Sometimes I see .22LR revolvers priced in the high $200's or so used because "they are only a .22" and the demand is not the same as for a .357 version.
BigBoar is offline  
Old December 27, 2005, 04:03 PM   #12
Glenn E. Meyer
Staff
 
Join Date: November 17, 2000
Posts: 15,550
I bought a used 94 for about $150 a few years ago. After a couple of trips to the range the cylinder froze. Back to Taurus. Then the rear sight blade refused to stay put. No matter how you tightened the screws.

Thus, I sold it.

I current have a Ruger SS Bearcat as a plinker/fun 22.
__________________
NRA, TSRA, IDPA, NTI, Polite Soc.
http://www.teddytactical.com/archive...05_Feature.htm
Being an Academic Shooter
http://www.teddytactical.com/archive...11_Feature.htm
Being an Active Shooter
Glenn E. Meyer is offline  
Old December 28, 2005, 11:19 PM   #13
zippyfusenet
Senior Member
 
Join Date: July 19, 2005
Posts: 158
I got the Ruger

Thanks for all the testimonials. Everyone who's owned a Taurus M94 says they break. That helps make my mind up.

Thanks BigBoar for answering my other question. Makes sense the way you explain it.

As it turns out, there was an inventory clearance sale at my FLGS, so I snapped up my 4" stainless Ruger SP101 .22 and shot it tonight. I need practice, but the gun shoots good.
zippyfusenet is offline  
Old December 29, 2005, 02:09 PM   #14
whiskey
Senior Member
 
Join Date: January 19, 2000
Location: Clarksville, TN
Posts: 431
Hold on now. I have had my Model 94 for about 3 years and it is my most fired gun. I put several hundred rounds through it every trip to the range. It works great, never a problem. Not with extraction, or breakage or anything else. I am guessing I have close to 10,000 rounds though the gun.

There seems to be a definite bias against Taurus on this board. I have bought 3 new guns this year. A ruger, that had to go back to the factory. A Tikka that had to go back to the factory and a marlin that was drilled and tapped off-center. Every major gun manufacturer has problems. If you ever work in manufacturing you understand the difficulty of producing large quantity at reasonable prices and never have a problem.

If everyone that has a 94 that worked well got on the internet and let you know about it, you would not be worried about buying one.
__________________
"So he cocked both his pistols, spit in the dirt and walked out in to the street."
whiskey is offline  
Old December 29, 2005, 05:17 PM   #15
zippyfusenet
Senior Member
 
Join Date: July 19, 2005
Posts: 158
The happy customer

Whiskey, you must have got the gun that was reviewed in all the magazines. I wish other satisfied M94 shooters had posted, but you're the only one. I don't see any strong prejudice against Taurus on this thread. A couple of posters made a point of telling me that the Taurus Tracker is a good revolver, at the same time they warned me against the M94. I've seen a virtual dogpile on the internet before, but I don't think that's what we had here. Anyway, thanks for getting back to me, and I'd like to try your M94 out some time, if I'm ever passing by.
zippyfusenet is offline  
Old December 29, 2005, 10:09 PM   #16
Doug S
Senior Member
 
Join Date: January 29, 2000
Posts: 693
I'm pretty down on Taurus after buying an Instant Backup in 9mm only to have to return it to the factory after the first range trip. That said, I did own a 2in snub Taurus 94 a few years ago. I put thousands of rounds through this firearm without any problems. Sold it to finance another gun purchase. I've also had a number of Taurus firearms require trips back to the factory, so I can't say that I'd recommend a Taurus unless your willing to take a chance.
__________________
"The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter cannot be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles." Col. Jeff Cooper, from The Art of the Rifle
Doug S is offline  
Old December 29, 2005, 10:09 PM   #17
leopard1
Senior Member
 
Join Date: December 29, 2005
Posts: 123
Comparison of S&W 63, Ruger SP101 .22 LR and Taurus 94

Have all 3.

4" steel Smith 63 is the best all around: accurate, portable, and a great trigger.

2" Taurus Ultralite .22LR is easiest to carry, carries the most rounds, and is very accurate, but the rear sight blade was loose (have had 3 Taurus .22 Magnum 2-inch steel revolvers that would not stabilize the round; get at least a 3" barrel if going up to a .22 Magnum).

The Ruger SP101 4" steel .22LR is the strongest and is fairly accurate, but is just too large and heavy to carry on anything other than an exposed belt holster.

For fun, get the Smith. For concealed carry, get the Taurus. For long-term durability, get the Ruger. Or get all 3 and have a ball.
leopard1 is offline  
Old January 1, 2006, 05:39 AM   #18
Mikeomatic
Junior Member
 
Join Date: October 18, 2005
Location: n.e.florida
Posts: 6
I also have a 94ul, The stock triger was awful.changed triger spring to a wolff spring out of a tarus 85 shooters kit.and main spring changed to a tarus 85 stock spring.(the wolff 85 kit in the tarus 94 produced light strikes)
Any way thousands of rounds tru the little gun with out a problem, always goes to the range with me, wife loves it also.
my 02 mike
Mikeomatic is offline  
Old January 1, 2006, 06:29 AM   #19
Socrates
Junior member
 
Join Date: January 5, 2005
Location: East Bay NorCal, People's Republik of Kalifornia
Posts: 5,866
I had a S&W 63, and couldn't hit much with it. Bought a Colt Trooper III, in 22lr, for 400, and it was FAR more accurate.
63 is a tin can type accuracy gun. I like my guns to hit finger nails, or better, at 10 yards.

s
Socrates is offline  
Old January 1, 2006, 10:04 AM   #20
MPH
Senior Member
 
Join Date: October 22, 2001
Location: WY
Posts: 275
Bought a snub 94 in stainless. Aren't any other 22s pistols around with 9 rounds in compact size. Never had any problems with it.
MPH is offline  
Old June 9, 2009, 09:23 PM   #21
TomL
Senior Member
 
Join Date: June 9, 2009
Posts: 119
Taurus 94

Hello all, I just bought a 94 4" matte ss finish. It has the feel of a nice piece except...lol...the hammer spur serations have the feel of making my thumb a raw bloody mess after a lot of use, as does the back of the hammer that strikes the transfer bar...I have some ideas to fix/alter. What have other owners done if anything? I also need to change the springs for dbl action and will try what "mikeomatic" did. By the way this post silent for 1256 days without any action/replys, whats with that...anyone out there? Tom
TomL is offline  
Old June 9, 2009, 09:42 PM   #22
ninjatoth
Junior member
 
Join Date: March 21, 2009
Location: sanford,mi
Posts: 590
my taurus 94 has been shipped back to them because the cylinder locked up and it misfires alot.other than that,it is an ok gun,shot pretty well and was very accurate.I hope it comes back soon.
ninjatoth is offline  
Old June 9, 2009, 10:45 PM   #23
MosinM38
Senior Member
 
Join Date: August 23, 2007
Posts: 1,030
Dad has one (Big sight problem. leastways see below).

My uncle also got one.

Both are plumb happy reliability wise. And we know 1 or 2 others in use with good results.

BUT A HUGE WEAKNESS:

On the rear sight, once sighted in, be SURE to take out the adjustment screws and loc-tite them in.
They fell out (Dad lost his blade), or come loose quite easily.

Dad sent in his entire rear site to get the blade replaced and ain't seen it since. My uncle loc-tited his screws afterwards, no problems since.
MosinM38 is offline  
Old June 10, 2009, 02:16 AM   #24
Piper Cub
Junior member
 
Join Date: February 5, 2009
Location: TEXAS
Posts: 491
A overpriced Ruger only has 6 rounds. Get an old H&R 929 as they hold 9 round and are inexpensive and built like a tank.
Piper Cub is offline  
Old June 10, 2009, 03:36 AM   #25
fast-eddie
Senior Member
 
Join Date: March 10, 2009
Location: Tigard Or,
Posts: 342
94

I love my taurus 94. The DA trigger pull was heavy, until I gave it the flitz trigger job. It's accurate and now the trigger is nice. I can't justify spending $600-700 on a .22 plinker, that is why I went with the taurus. I hear that replacing the spring makes it very unreliable, and would advise against it.

I own two taurus .22's (pt22 as well) and wouldn't hesitate to buy another revolver from them. Next probably a tracker or raging bull.
fast-eddie is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.12606 seconds with 7 queries