The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 8, 2000, 04:43 PM   #1
kjm
Senior Member
 
Join Date: December 24, 1999
Location: College Station, Texas
Posts: 1,871
My Grandfather recently passed away, and left each of us a Mauser he liberated in WWII. He was in Czechoslavakia (sp?) and found an American fighting for the Germans. He was given a half doz mausers pre-1936, and the unit he got them from was a German unit. They are in pretty good shape (85%), but I would like to rechamber one in 30-06 and give it to my son. My questions are:
1. Will I be ruining a valuable firearm, or are these fairly plentiful?
2. Can I rechamber this firearm for 30-06, or is that not practical?
3. Where can I go to get info on this rifle?
kjm is offline  
Old January 8, 2000, 06:38 PM   #2
2shots
Senior Member
 
Join Date: October 6, 1999
Posts: 183
KJM, Tell us about the markings. That likely will determine whether to sporterize, leave alone or sell.
2shots is offline  
Old January 8, 2000, 06:54 PM   #3
wildcat
Member
 
Join Date: December 20, 1999
Location: Northeast Kingdom of Vermont
Posts: 88
I don't know much about mauser values but I do know you can't rechamber for 30-06. Your mauser has a .323 bore and the 06 needs a .308 bore. If you want a 06 you will need to rebarrel. If you don't mind loading your own ammo you may rechamber for the 8mm-06 this wildcat uses the .323 bullet and a 30-06 case.I have made a half dozen of these for myself and friends.It is a excelent round that will equal the 06 with bullets up to about 160 grain and better it with anything over 160. The loading dies are available from RCBS if your smith does not have a ream he can rent one from www.reamerrentals.com or maybe I would sell you mine .
wildcat is offline  
Old January 8, 2000, 11:01 PM   #4
George Stringer
Staff Alumnus
 
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
KJM, as 2shots said, we'd really need to know the markings before answering. For the most part Mausers are good for sporterizing, rebarreling, etc. But there are some that command premium prices among collectors. Before you do anything with yours, lets make sure it's a plain old 98. George
George Stringer is offline  
Old January 9, 2000, 12:43 AM   #5
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,131
In any event, modifying a '98 for a .30-'06 length cartridge requires some magazine work. Today, .308 is probably a better bet.

Jim
James K is offline  
Old January 9, 2000, 05:08 AM   #6
wildcat
Member
 
Join Date: December 20, 1999
Location: Northeast Kingdom of Vermont
Posts: 88
Jim as I said I have rechambered a few 98s for 30-06 length rounds,as yet I have not had to do any magazine work to get them to feed.My experience is limited as I am not a real gunsmith just a gun nut. Are some 98s shorter than others?Maybe George can help us here.
wildcat is offline  
Old January 9, 2000, 08:52 AM   #7
George Stringer
Staff Alumnus
 
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
Wildcat, that seems to be individual to the rifle. Normally you wouldn't have to modify the box for a long action cartridge. The mods usually come into play for a case that is larger in diameter. Although, I have seen a couple that did have to be "adjusted" for length. George
George Stringer is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:32 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08872 seconds with 7 queries