The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old December 9, 1999, 09:09 AM   #1
blooch
Senior Member
 
Join Date: December 5, 1999
Location: texas
Posts: 152
thinking about purchasing a friends alloy framed full size para ordnance(p14) and i understand that these frames crack. where would i look and how many rounds does it take to show up?
blooch is offline  
Old December 9, 1999, 10:18 AM   #2
JoeHatley
Senior Member
 
Join Date: July 1, 1999
Location: Iowa
Posts: 2,135
Mine cracked at the bottom of the grip, where the pin for the mainspring housing goes through. Most however crack up front, where the slide release passes through the frame.

Good Luck...

Joe


------------------
Go NRA
JoeHatley is offline  
Old December 9, 1999, 11:48 AM   #3
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,311
I have seen alloy frames (not Para-Ordnance) cracked between the top corner of the frame and the front of the slide stop hole and also in the small web over the rear slide stop hole.

Remember that the slide stop takes a lot of pounding because it is what stops the whole works when the slide goes back into battery. The slide rebounds off the frame and assisted by the spring, comes forward with a lot of force. The barrel rides up on the slide stop and the whole thing comes to a crashing halt, beating on the slide stop and the frame that supports it. Some alloy frames just can't take that pounding for long.

Jim
James K is offline  
Old December 10, 1999, 12:11 AM   #4
Art Eatman
Staff Lead
 
Join Date: November 13, 1998
Location: Terlingua, TX, USA
Posts: 22,446
I have a lightweight Commander which I dearly love. It's my favorite carry-gun. I've put a few hundred rounds through it over the years, but I don't use it as a regular shooter.

So, if it's to be your only pistol, and you're planning on lots of shooting, don't get an alloy-framed gun. If it's one of several, and your primary use would be carry, get it.
Art Eatman is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06065 seconds with 7 queries