The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old November 27, 2005, 09:25 AM   #1
Dubby
Junior Member
 
Join Date: November 27, 2005
Location: Altoona PA
Posts: 2
Can't find any componets for 34-40Win.

Hi gang hope I put this in the right place. I have my Great Grandfather's Winchester 1894 leaver action 32-40 rifle. I have tried to find ammo for it for 5 or 6 years now with no luck. Now I'm looking for brass and bullets to try reloading my own but am haveing the same bad luck. Any help out there would be greatly welcomed.

P.S. I need to learn to type too the rifle IS a 32-40
Dubby is offline  
Old November 27, 2005, 09:47 AM   #2
Hydrargyrum
Junior Member
 
Join Date: November 11, 2005
Posts: 12
This is a start I suppose.

I wouldn't use that as gospel though. Just a little something to get the juices flowing.
Hydrargyrum is offline  
Old November 27, 2005, 10:25 AM   #3
Leftoverdj
Senior Member
 
Join Date: October 15, 2004
Posts: 934
There's a good article in Ken Water's "Pet Loads". Lee #2 has data. Most folks reform cases from .30-30. The .32-40 is a natural cast bullet cartridge and .323 cast bullets intended for the 8mm will work fine in most rifles.
Leftoverdj is offline  
Old November 27, 2005, 11:45 AM   #4
MrGee
Senior Member
 
Join Date: June 7, 2005
Location: NC
Posts: 258
Mid-way has brass in Winchester Brass 38-55 WCF Box of 50
Product #: 249870
Status: Available
Our Price: $13.29 Sale!


http://www.midwayusa.com/
MrGee is offline  
Old November 27, 2005, 12:00 PM   #5
sundog
Senior Member
 
Join Date: November 22, 1999
Location: Green Country, OK
Posts: 730
Dubby, check on the single shot boards as 32-40 is popular with them. Seems like this brass only gets run once in awhile. Also, in the interest of preserving that fine rifle, you might want to think about casting for it to keep from wearing out the barrel, plus you can size your bullets according to increase accuracy. If you don't know how to do that, check with the cast boolit boards. sundog
__________________
safety first
sundog is offline  
Old November 28, 2005, 06:57 PM   #6
Dubby
Junior Member
 
Join Date: November 27, 2005
Location: Altoona PA
Posts: 2
Thanks guys you've given me a few more places to look. Wish me luck.
Dubby is offline  
Old November 28, 2005, 10:26 PM   #7
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 36,241
Dubby,

If you don't mind the drive, there's a big gun show Dec. 10-11 or something like that at the Farm Show.

I'd bet that you'd be able to find ammo or components or both at that show.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old December 26, 2005, 03:59 PM   #8
oldguy52
Member
 
Join Date: December 25, 2005
Posts: 32
There were some 32/40 fired cases on ebay. Also check Midway, they had the cast bullets for it. Just be sure what you shoot has the right nose as it's a tubulare magazine. Those 94s are neat old guns, I had one in rifle years ago that had been made in 1912, had a half round and half octagon barrel. Sold it to buy Colt series 70. So it goes.
oldguy52 is offline  
Old December 27, 2005, 09:25 AM   #9
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,270
Huntington's
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old December 28, 2005, 12:21 AM   #10
somerled
Senior Member
 
Join Date: June 11, 2005
Location: eastern Kansas
Posts: 597
Dubby, here's a link to a place offering .32-40 Winchester brass.

http://www.bosesguns.com/product_p/winsc3240wu.htm

Midwayusa.com should be able to help with the bullets, dies and other stuff.
somerled is offline  
Old December 29, 2005, 01:29 AM   #11
6mm4me
Member
 
Join Date: November 30, 2004
Location: kansas city area at the present, but Colorado and Wyoming have been home. Lived 2 years in the middle east.
Posts: 33
32-40

Try Buffalo Arms Co. They list brass and bullets for it. I have used them and they seem like a good outfit to deal with.
6mm4me is offline  
Old December 30, 2005, 03:43 PM   #12
30Cal
Senior Member
 
Join Date: December 3, 2002
Posts: 1,106
You can try sizing 30-30 or .32Special brass (use a lot of lube) and you should come up with brass that will work. You might end up a little short on length, but it shouldn't matter much at all.
30Cal is online now  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09706 seconds with 7 queries