The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old August 14, 1999, 12:59 PM   #1
Joe the Redneck
Senior Member
 
Join Date: December 19, 1998
Location: New port richey FL us
Posts: 473
I need to lop 6 inches off a double barreled shotgun. My local guy said it would cost 75 bucks and I'm not going to spend anymore on this thing. I just need to get it down to 20 or 21 inches. It's going to be used for CAS and fun things, not real shootin.

Okay, I'm in over my head, so I need help. Hacksaw of dremeal moto tool. I was thinking of using a dollar bill as a measuring tool, as they are 6 inches long. What should I use to clean up the cut, file or paper? Are the Ribs going to be a problem? How do I fill in the little space betwit the barrels? This gun had already been cut down by the last owner, so I'm not screwing upa anthing that hasn't already been screwed up before.

Thanks for any help.
Joe the Redneck is offline  
Old August 14, 1999, 06:05 PM   #2
George Stringer
Staff Alumnus
 
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
Joe, use a hacksaw to shorten. A file to square and then you might want to smooth with crocus cloth. If your lucky you can fill just the opening with solder. Smooth it out and color with Beechwood Casey Solder Black. Don't use a flame as it could heat the barrels enough to allow them to separate. Use a solder gun and just drip it in. You're just filling a hole. It isn't holding anything. I like to shape a small piece of steel to fit the opening, insert about 1/32" to 1/16" deep and then fill with solder. George
George Stringer is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05889 seconds with 9 queries