The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old August 12, 1999, 04:05 PM   #1
volky
Member
 
Join Date: February 11, 1999
Location: A yankee who won`t leave NC
Posts: 70
Since it was my first gun I chaulked the inaccuracy up to my inexperience.But after getting a S&W 686 and a 22A and being able to get 4" groups with open sights without a rest with those guns I figured it had to be the gun.

Heres the problem:

S&W 5906 fixed sights shoots 8-10 inch groups at 25 yds regardless of the ammo used. It hits mostly to the lower left but a lot of them go to the right also. Put it on a rest and it`ll do 6 inch groups at best. I even gave it to someone at the range who is more experienced than myself and the best he did was 5 inches from a rest at 25 yds. It never jams or has any feeding problems.

I`m going to send this back to S&W. But would anyone care to take a guess as to what is wrong?
volky is offline  
Old August 12, 1999, 07:55 PM   #2
Al Thompson
Staff Alumnus
 
Join Date: May 2, 1999
Location: South Carolina
Posts: 3,603
There are several possibilities, but other than for your information, they are speculation at best.

The thing to do is send it to S&W and let them figure it out. Don't tell them what we or you think as they may only look at that problem and no furthur.

All that aside, I suspect you have a barrel lock up problem. My 5906 and 6906 ( same gun, aluminum frame, not sure of the stock #) shoot much tighter than that.

Lower left hits, BTW, usually mean that your pushing the trigger. Big groups indicate something wrong with the gun.

Giz

------------------

"Hear the voices in my head, swear to God it sounds like
they're snoring." -Harvey Danger, "Flagpole Sitta




[This message has been edited by Gizmo99 (edited August 13, 1999).]
Al Thompson is offline  
Old August 13, 1999, 04:45 PM   #3
HS
Senior Member
 
Join Date: October 11, 1998
Location: Brisbane.....Australia
Posts: 1,258
Try for accuracy at a much closer distance !
Start at 5 yards & move your target back at 5 yard increments.
If you're NOT all over the paper at 15 yards, you'll be happy to know that it ain't the gun but the person/s using it.
A small error in marksmanship will be greatly enhanced the further away the target gets ! - I should know as I can get 1/2" groups at 7 yards with a 2" snubbie but can barely touch the target at 25 yards
Mind you, I can get 1" groups with my 6"
S&W M-19 at this distance.
Practice, practice, practice.

------------------
"The Gun from Down Under !"
http://www.para1911fanclub.w3.to/


HS is offline  
Old August 13, 1999, 06:49 PM   #4
chucko
Senior Member
 
Join Date: May 20, 1999
Posts: 151
Yes, check the accuracy from a ransom rest at 5 yards, then 10, 15, and 20 yards. You may notice a point where accuracy REALLY goes down hill.

I'm better with rifles than pistols, but I've seen something similar with a rifle. Just at longer ranges.

It had to do with the twist of the barrel and weight of the bullet. Due to the slow twist of the barrel, the heavy bullet would become unstable after a certain distance, and the 200 yard tack driving rifle would give you a group that looked more like a shotgun pattern when you shot it from 300 yards.

Hope this helps

Chuck

[This message has been edited by chucko (edited August 13, 1999).]
chucko is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06095 seconds with 7 queries