The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old July 16, 1999, 04:36 PM   #1
Nestor Rivera
Senior Member
 
Join Date: October 20, 1998
Location: San Antonio, Texas, USA
Posts: 446
We have all seen the adapters to shoot 32acp or 32s&w in vairous firearms of differint caliburs (7.62x54,7.65arg,7.7jap etc) I was just thinking if you had say one of the NEF HandiRifles you could reverse the Idea to some extent in that you could make a 30.06 to x.xx so you could shoot various lesser cartridges like 7.62x25 or 30mauser, 30luger
30 carbine 32-20 30-40 etc etc etc..

Being as the Handi is a break open you really would not loose that much in speed, if you really think you can make 2 shots on a target wiht it get 2 adapters.

I wonder how much it would cost to have these adapter cnc'd out of an appopriate grade of steele.

Nestor Rivera is offline  
Old July 16, 1999, 08:28 PM   #2
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,646
Just about any good gunsmith with a lathe and the appropriate chambering reamers ought to be able to make adapters like you describe or modify .32 ACP adapters. (.32 ACP uses a .308 bullet and those adapters work fine in .30 rifles.) I think the cost of making an adapter would, as they say, be off-putting.

It would depend somewhat on whether the adapter is to be rifled or only smoothbore from the bullet of the smaller cartridge to the throat of the barrel. Note that there could be trouble with higher pressure cartridges like the .30 Mauser, as the adapter is not fully supported and could bulge.

Jim
James K is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06294 seconds with 9 queries