The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 1, 1999, 03:18 AM   #1
Patrick
Member
 
Join Date: December 18, 1998
Posts: 31
I had the opportunity to fire a friend's match S&W .38 revolver the other day and was amazed at the smooth and light trigger it had. Certainly not what I was used to with my 586.

I have since been told that a smith will polish away on certian parts, and completely remove others to get such a light smooth pull.

Is this correct? Removing parts?

How do I get that trigger great trigger on my gun?

Patrick
Patrick is offline  
Old January 1, 1999, 07:35 AM   #2
George Stringer
Staff Alumnus
 
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
Patrick, I wouldn't remove any parts. On revolver trigger jobs I use a 9 point check list that covers any part that may interfere with a smooth trigger. After that, if necessary, I may use a reduced weight mainspring and rebound spring. Mostly though it's a matter of polishing. George
George Stringer is offline  
Old January 1, 1999, 09:36 AM   #3
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 16,923
Patrick,

Remove parts? You may modify parts but shouldn't remove them. They were put there for a reason and may have a role in the built in safety system of the gun.

Witness the rebound slide of the S&W revolver. It not only serves to return the trigger, and as a base for the hammer block, but also serves indepently as a hammer block in its own right since it prevents the hammer from rotating fully forward when the trigger isn't depressed (the step of the rebound slide intercepts the step at the base of the hammer). Early Taurus guns had this feature but later ones omit it (that's why I'll always take a S&W over Taurus, even if it's $100 more).

While it's not hard to tune the trigger of a S&W revolver, it's also not a task to tackle without training. Better to take it to a reputable gunsmith than have a buddy pry off the sideplate or try it yourself. If you would like to do it yourself, try attending a NRA Gunsmithing class. You can find the NRA via the links to this website and NRA classes are more affordable than the factory armorer's school.

Gary
4V50 Gary is offline  
Old January 1, 1999, 03:30 PM   #4
Patrick
Member
 
Join Date: December 18, 1998
Posts: 31
Thanks guys - I kind of thought that the guy who told me that was a bit, how shall we say, "off."

I have replaced the mainspring and rebound spring with some reduced weight springs from Wolf, which has lightened the trigger pull to some extent, but has not smoothed it out a bit.

I will ask around for a good smith in my area to do the "polish" job mentioned above.

Patrick.
Patrick is offline  
Old January 1, 1999, 08:54 PM   #5
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 16,923
Patrick,

A distinction between a self-defense firearm and a target gun must be drawn. A target gun is like a prima donna who wants to be fed a special ammunition diet. She may not or will not work with all types of ammo or under non-match conditions.

A self defense firearm must be reliable. Period. It must shoot first time, every time and lightening the spring could compromise ignition. Lightening the rebound slide spring could slow the rebound slide down; impeding its safety function. If you're 586 is a target/range gun which you won't use in self defense, no problem. Enjoy. If you want it to do double duty, ensure its reliability by testing it with the ammunition you plan to use for self defense. Have fun.

4v50 Gary
4V50 Gary is offline  
Old January 2, 1999, 12:55 AM   #6
Patrick
Member
 
Join Date: December 18, 1998
Posts: 31
Gary -

A good point. My 586 is NOT my defensive weapon. Although it's a great gun, it's kind of hard to conceal that big 6" bbl. I just want this one to be a smooth, accurate, match gun.

Patrick
Patrick is offline  
Old January 3, 1999, 10:57 PM   #7
olegunftr
Member
 
Join Date: December 30, 1998
Location: marietta, ga, usa
Posts: 71
Strangely enough, the 2 of the last 3 new smith wheel guns I bought had crummy DA. I care cause that is the only way I shoot them. Both of them had problems in the rachet/hand area rather than the trigger - hammer surfaces. I'm a smith armorer, but it still took me a while to get it right. one was s 686.

------------------
Vinny

olegunftr is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:25 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07946 seconds with 9 queries