The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 19, 2005, 11:22 PM   #1
capbuster
Senior Member
 
Join Date: August 7, 1999
Location: Bessemer,Alabama
Posts: 301
Speer .357 soft point bullets

I dont use alot of jacketed bullets in my handguns but for years I have used Speer jacketed soft point bullets for some of my .357 magnum loads.I recently got into my newest box of these bullets and they are a bit different. Compared to the older bullets,there is very little exposed lead and the bullet base is dimpled. Forgive my ignorance but this has me puzzled?
__________________
cliff
capbuster is offline  
Old May 19, 2005, 11:31 PM   #2
EchoFiveMike
Senior Member
 
Join Date: February 12, 2000
Posts: 416
The dimple in the bottom is from "bumping up" the projectile to the proper size. This is common with the electroplated bullets that are Speer's main pistol line. I was aware that this is available as soft point, perhaps they are Gold Dots, with minimal hollow cavity? I know the 158gn GD's have very little hollowpoint cavity, with a skivved nose, this bullet being designed for hunting and greater penetration. S/F...Ken M
EchoFiveMike is offline  
Old May 23, 2005, 02:31 AM   #3
Bullet94
Senior Member
 
Join Date: September 8, 2004
Location: Kansas
Posts: 723
I believe the bullets you have are Uni-Cor. Most of Speer’s 357 bullets are. The only 357 soft point bullets I see on their web page are Uni-Cor. I think they’re supposed to retain their weight better than conventional bullets. The jacket doesn’t separate because there is no jacket. Speer calls them bonded core (plated I believe). Suppose to work good. I us Gold Dots in 357 they're Uni-Cor too.
__________________
PRO-SECOND AMENDMENT - Live Free or Die
Bullet94 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06762 seconds with 9 queries