The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 22, 2005, 06:09 AM   #1
41special
Senior Member
 
Join Date: January 7, 2005
Location: Northern Virginia
Posts: 263
.45 Colt Jacketed Bullets???

Thanks for all the help with my sizing die issue.

Now has anyone found a source for JACKETED or SEMI-JACKETED .45 Colt bullets that are NON-HOLLOWPOINT ???????

I want some JSP loads for my M25-13, but I feel like I'm wasting good money to throw hollowpoints at paper all the time.

I've checked all the major manuf...

Is thier any 'little guys' out there making them ?
__________________
___________________________________

An old west lawman once said when asked why he carried a .45, "because they don't make a .46"

God created man, Sam Colt made them equal.
41special is offline  
Old May 22, 2005, 07:16 AM   #2
.45 Vet
Senior Member
 
Join Date: May 21, 2004
Location: Western Penn.
Posts: 370
I don't have a current catelog, but I've loaded SPEER 300gr JSP's for hunting. I thought they had some lighter offerings. I'm basically a penny pincher and always use hard-cast lead for paper....
__________________
For those who've never fought for it, the price of freedom shall never be known...
.45 Vet is offline  
Old May 22, 2005, 07:34 AM   #3
41special
Senior Member
 
Join Date: January 7, 2005
Location: Northern Virginia
Posts: 263
I looked at Speer and the 300 is all they have, I think it's a little heavy for target.

I usually don't mind using lead, I've found some nice hard cast stuff, but it's just breaks my heart shooting them in that new Smith.

I did find some Berry's Plated Bullets, and I think I'm going to try 'em
__________________
___________________________________

An old west lawman once said when asked why he carried a .45, "because they don't make a .46"

God created man, Sam Colt made them equal.
41special is offline  
Old May 22, 2005, 07:35 AM   #4
HSMITH
Senior Member
 
Join Date: June 21, 2002
Posts: 2,019
Hopefully WESHOOT2 will stroll back by and see this. He is a walking talking encyclopedia of reloading. You could also send him an email and ask if he doesn't see it soon. I don't know of anyone else that has tried more loads than he has.

I would also put a call in to the tech department of the bullet makers, 45 bullets with the advent of the Casull and Ruger only loads has created a crop of bullets that will not work well at 45 Colt velocities. Conversely if you are shooting hot rod loads the bullets made for Colt velocities will fail miserably. Make sure the bullet you want to use is designed for the speed you will launch it at.
HSMITH is offline  
Old May 22, 2005, 08:38 AM   #5
Desert Dog
Senior Member
 
Join Date: September 22, 1999
Location: Dallas, TX
Posts: 473
The Berry's plated bullets work pretty well.

I agree with others here though... I throw lead at paper.
__________________
.45 Super... Fat and FAST... but for real firepower, .45 Blackhawk!

Yes, in fact I do have a 454... in more ways than one.

"No provision in our Constitution ought to be dearer to man than that which protects the rights of conscience against the enterprises of the civil authority" - Thomas Jefferson
Desert Dog is offline  
Old May 22, 2005, 11:35 AM   #6
Poygan
Senior Member
 
Join Date: August 28, 2004
Posts: 125
I agree with the folks who use lead bullets for target purposes. For years, I used jacketed bullets for general plinking and finally realized that it didn't make sense. The only jacketed or plated I use now is for a Glock. Besides, casting your own is a very interesting expansion of the shooting hobby. I cast for every handgun caliber I shoot, from 25ACP to 45 colt, plus some rifle calibers.
Poygan is offline  
Old May 22, 2005, 01:49 PM   #7
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,191
Sierra also makes a 300 grain soft point. If you are looking for something lighter that will still perform well on game, you might consider Hornady's 230 grain FMJ/FP ENC creation. This is basically a truncated cone design intended for the .45 ACP, but it should shoot well in the LC. It won't expand, but it will kill well, as most flat meplate bullets do on game. I bought a box of 1500 from MidSouth Shooters Supply (www.midsouthshooterssupply.com) for about $140 after shipping from TN to OH was added in.

Nick
Unclenick is offline  
Old May 22, 2005, 04:30 PM   #8
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,139
blushing modestly, admitting to still being on the upswing of the learning curve

Rainier may still offer their Total Copper Jacket plated 45 Colt bullet in 250 or 300g.
(Says so on their website.)


I'm sittin', I'm typin', I'm certain there's some folks who make my experience seem like a virgin's. Ay?


I use the Redding Profile Crimp die on my revolver uncannelured Rainiers; kinda heavy (never have split the plating).
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07700 seconds with 7 queries