The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 19, 2005, 08:58 PM   #1
BigSlick
Senior Member
 
Join Date: January 25, 2005
Location: Texas of course
Posts: 277
Shiny clean primer pockets and inside of the case

Hi guys,

I went to the local gunshow over the weekend and picked up a few bags of rediculously cheap once fired 45 ACP brass.

It was processed, with primers punched out, any AMERC, or mil crimp cases culled out.

I got into it tonight and am amazed at how clean this brass is. The primer pockets, inside the case and everywhere else is shiny new looking.

I have tried the IOSSO, Birchwood Casey, vinegar chemical cleaning methods and have had mediocre results at best. The outside comes out pretty clean, but the primer pockets and inside the case still has carbon deposits on it.

I generally use TufNut in the Lyman Turbo for a few hours to get things looking good and ready to load. I clean primer pockets with the RCBS Trim Mate (great time saver).

With the Tufnut/Tumbler/Trim Mate or the chemical cleaning methods I still have never been able to get the inside of the cases and primer pockets shiny clean and looking new.

I know this isn't essential to a good reload, but I am trying to figure out how the guy selling the brass got it so clean. I called him and he is one of those smart-aleck types (great prices though) that seems to get a kick out of having a 'secret' to getting brass so clean. In short, he isn't telling.

With all the wealth of experience and knowledge I have found on this site, I figure one of you may have a recommendation, or know this idiot's 'secret'.

Can someone help me out here ?

Thanks

BigSlick
BigSlick is offline  
Old April 19, 2005, 09:46 PM   #2
cheygriz
Senior Member
 
Join Date: May 11, 2002
Location: high up in the rockies
Posts: 2,232
I'll just betcha that he washes it in a concrete mixer with liquid Tide and warm water. That's a great way to clean brass. The best, IMHO)

Some pholks throw in a couple of ounces of phosphoric acid per ten gallons of water and that does a great job, but the thought of using any kind of acid on my cases gives me the "willies" so I just use water and Tide.

And I no longer have a concrete mixer, so I use a Thumler's model "B" rotary tumbler. Warm water+Tide+ 20 minutes tumbling time= bright shiny brass.

At least, it works well for me!
__________________
If you think a mighty military force is expensive, wait 'til you see what a weak one costs.
cheygriz is offline  
Old April 21, 2005, 09:42 AM   #3
LotI
Member
 
Join Date: April 19, 2005
Location: America's Dairyland
Posts: 47
Change media

From personal experience...change your tumbling media. I used Lyman and found that the Frankford Arsenal untreated media has a finer grind that gets into the pockets better and doesn't get stuck in the flash hole nearly as much. The Lyman does clean a little faster, though.

I add a couple of capfuls of Flitz and they come out shiny with reasonably clean primer pockets.
LotI is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:44 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06804 seconds with 9 queries