The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Hunt

Reply
 
Thread Tools
Old May 11, 2000, 10:43 PM   #1
jonb10
Junior Member
 
Join Date: June 28, 1999
Posts: 7
Today I had a neighbor of mine(who knew I would try to hunt about anything) ask me to come over and try to get rid of some coyotes that were killing his newborn goats. I have never seriously hunted coyotes before. I have purchased a cottontail distress tape but I only have a hand held tape recorder to play it over. How much amplication do I need?

[This message has been edited by jonb10 (edited May 11, 2000).]
jonb10 is offline  
Old May 11, 2000, 11:21 PM   #2
R&H
Member
 
Join Date: February 21, 2000
Posts: 48
I would try about in the same range as a baby's cry for the max setting on your recording. Well, my son's crying is pretty loud so think of a loud baby. Maybe a little louder sometimes or maybe softer other times. If the coyotes haven't been hunted before they shouldn't be that hard to call in. If they have been hunted a lot, maybe they will and maybe they won't. You might have to experement a little.
I like the calls that you blow into. We usually start out kind of soft, get louder and then kind of soft again if a coyote is coming. In my experience coyotes usually come pretty quick. If I haven't seen one in 30 to 45 min I usually move on. I wouldn't sit in the same spot for too long.



R&H is offline  
Old May 12, 2000, 09:05 AM   #3
Art Eatman
Staff Lead
 
Join Date: November 13, 1998
Location: Terlingua, TX, USA
Posts: 22,585
Using a tape deck and a rabbit tape, I've always started out a bit loud, turning it down after the first 10 or 20 seconds. My reasoning is that it will attract coyotes from further away, and then sound more realistic. What coyote is really eager for a 400-pound rabbit?

In the dark of the moon, full nighttime seems to work better. During the full of the moon, late afternoon from, say, an hour before sundown or so works well, as does the period from first light to maybe an hour after sunup. My theory is that with a lot of moonlight, prey animals have a better chance of escape and predators have to work harder for a meal. So, they're up and moving for longer periods. Damfino; it works.

Coyotes tend to come in on a call and then at 50 to 100 yards out, circle to get downwind to smell the rabbit. To counter this, if you set up at the edge of a brush or tree line where the wind is blowing along the edge, you force the coyote to quarter in, across an open area. He can't smell you, then, and you have a more open shot.

If you use a spotlight or flashlight, don't shine it directly in the coyote's face. Catch his eyes in the edge of the beam, after you've identified him. Using some sort of red lens-cover helps. I use a Q-Beam with a red cover; works well. Even a hand-held 2-cell flashlight is okay at closer ranges, if you're not concerned about somebody's pet dog.

There are tapes of a baby goat sounding unhappy; you might use one of those, with a carcass of a coyote-killed goat out in front of you...

Good hunting!

Art
Art Eatman is offline  
Old August 1, 2000, 08:51 PM   #4
M1911
Senior Member
 
Join Date: March 28, 2000
Posts: 4,055
Art:

But how do you shoot him while you are holding the flashlight? Do you mount the light on your rifle? What kind of sights allow you to see the coyote at night?

Jared
M1911 is offline  
Old August 1, 2000, 10:22 PM   #5
Art Eatman
Staff Lead
 
Join Date: November 13, 1998
Location: Terlingua, TX, USA
Posts: 22,585
I use a scoped rifle; either my .243 or my .223. I've gotten used to holding either a Q-Beam or a Streamlight (prefer the latter) against the fore-arm with my left hand. Takes a bit of practice. (Poaching makes perfect? ) Overall, at night it's all better with two people; one on the gun, one on the light and take turns.

I took a piece of cardboard to make a tube around the Q-Beam to reduce glare into the scope...

You can mount a light onto the gun, with a pressure switch to activate with your left thumb, but most flashlights that can be fitted with a pressure switch don't have all that much range.

A light on your head screws up the scope, but can help if you just have iron sights--but it lights up the whole gun. And, proper alignment is a hassle...

Hope all this BS helps.

Art
Art Eatman is offline  
Old August 3, 2000, 06:18 PM   #6
Glamdring
Senior Member
 
Join Date: April 23, 2000
Location: MN
Posts: 1,388
Hmm so if I mount a Leopard light on my Steyr Scout and load it with the 110 V max I might have a decent coyote night rifle?
Glamdring is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:55 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06595 seconds with 7 queries