The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 19, 2005, 09:29 PM   #1
BigSlick
Senior Member
 
Join Date: January 25, 2005
Location: Texas of course
Posts: 277
FA 42 headstamp - corrosive ?

Hi guys,

I picked up some 30-06 brass at the show over the weekend. It is in great shape and the price was right - 2.00 for 50.

I got it home and was going to start prepping it and noticed it is primed. Looks like the original primer, since the crimp is still in place. I am not about to load with 63 year old primers.

Before I started to get rid of these and swage the crimp out I have a couple of questions:

Are the primers from RA 42 corrosive and what are the chances they are still live ? If so, any idea on the best way to deprime ?

Thanks in advance for any insight

BigSlick
BigSlick is offline  
Old April 19, 2005, 09:58 PM   #2
cheygriz
Senior Member
 
Join Date: May 11, 2002
Location: high up in the rockies
Posts: 2,232
Yes, they are corrosive!

There is no good reason not to load a few and shoot them. this is probably "pull down" brass. If the primers are still good, and they should be, you'll have no trouble. You must, of course, clean your barrel immediately with a solvent that neutralizes corrosive salts, or warm soapy water.

If the primers are dead (highly unlikely) drop a quick spray of WD-40 into the case mouth and let sit overnight. Then deprime normally, but carefully.

I know you're not supposed to deprime live primers, but I've done several thousand and never had one go off.

The operative words here are: SLOW, AND CAREFUL!
__________________
If you think a mighty military force is expensive, wait 'til you see what a weak one costs.
cheygriz is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:05 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06643 seconds with 9 queries