The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 11, 2005, 04:32 PM   #1
kkb
Senior Member
 
Join Date: September 5, 2004
Location: Western Slope, Colorado
Posts: 379
Barnes "Triple-Shock"...Worth it?

Starting to load .308 Win for a Browning 81 BLR pre "lightweight" (20" bbl/1:12 twist.) Aside from my usual Sierra and Hornady suspects are Triple-Shocks worth trying out?

Comments on terminal performance, accuracy, quirks and pet loads greatly appreciated.
kkb is offline  
Old April 11, 2005, 09:34 PM   #2
Mark whiz
Senior Member
 
Join Date: May 19, 2004
Location: Wabash, IN
Posts: 227
I've had very nice results using the 168gr TSXs in my .308s (M1A & Win Model 100). I load them about .2 or .3gr hotter than my target loads with MatchKings and all is well. Very accurate, marvelous results on game, and no copper fouling.

They've become my hunting bullet of choice.
__________________
"Every moving thing that liveth, I give unto you as meat" (Gen 9:3)
Aim small.........miss small.
Trust God..........but keep your powder dry
!
Mark whiz is offline  
Old April 12, 2005, 01:22 PM   #3
kkb
Senior Member
 
Join Date: September 5, 2004
Location: Western Slope, Colorado
Posts: 379
Thanks for the note. I'll give 'em a try.
kkb is offline  
Old April 15, 2005, 12:05 PM   #4
rbernie
Senior Member
 
Join Date: August 10, 2004
Location: Plain Ol', TX
Posts: 713
They are expensive, but they are also very accurate in every rifle that I've tried 'em in. I've not used them on game yet, so I can't tell you how well they expand/hold up/etc.

They do seem to 'pull' more easily from case necks than any other bullet I load, so I use the Lee Factory Crimp on any reloads that I make with the TSX's. Also, if you *do* use a crimp with them, you may have to fiddle around a bit to get a good seating depth *if* you try to use one of the grooves as a cannelure (as I do).
__________________
-A conclusion is not a destination, it's simply a convenient place to stop thinking.-
-Reading a thing doesn't automatically make it so; repeating it doesn't necessarily make it any truer.-
-Every Texan should be a member of the Texas State Rifle Association.
rbernie is offline  
Old April 15, 2005, 04:37 PM   #5
j_mcdade
Junior Member
 
Join Date: April 13, 2005
Location: Placerville, CA
Posts: 3
Barns Triple Shock...

I have heard, numerous times, that the Barnes Triple Shock is known for copper fouling a barrel in short order. I have also heard that butchers hate the Barnes bullets. Guess you will just have to try some!

Good Shooting,

Jim
j_mcdade is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06222 seconds with 7 queries