The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 10, 2005, 12:21 AM   #1
kidvillain
Junior Member
 
Join Date: April 10, 2005
Posts: 1
40 S&W 180gr SWC load?

Bought some 180gr Bear Creek SWC bullets today and cannot find a suitable load let alone any load info utilizing Unique, Bullseye, or 231...........I have a ton of these powders and want load info on just these powders. These will be used in a CZ40P for practice and plinking only!
kidvillain is offline  
Old April 10, 2005, 06:39 PM   #2
rbwillnj
Member
 
Join Date: December 14, 2004
Location: Northwest NJ
Posts: 38
I use 3.8 - 4.0 Grains of Bulleye with 180 grain FMJ bullets. In my Beretta 96, 4.0 grains makes the power factor for IDPA with room to spare. I just recently started lowering the charge to see if I could make the power factor with a little lighter load. It shoots well, but I haven't checked it with the crony yet. I have also used 4.0 grains of Bullseye with 180 grain LSWC and it shot well also, but maybe not quite as tight a group as with the FMJ bullets. Good enough for IDPA though.
rbwillnj is offline  
Old April 10, 2005, 08:52 PM   #3
scottys1
Senior Member
 
Join Date: May 21, 2004
Posts: 310
kidvillain, I've tried several powders in .40, but of those you listed I've only used Unique.
I've used from 5.0 to 5.5 grains of Unique with the same Bear Creek 180 gr. bullet. I settled on 5.1 gr which would reliably make USPSA major power factor in my guns.
scottys1 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06076 seconds with 7 queries