The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 5, 2005, 03:53 AM   #1
Dgremlin
Member
 
Join Date: November 25, 2004
Location: Las Vegas, NV
Posts: 34
Load Increases

I'm reloading some .44 mags and I'm using CCI300 primers with 240 gr. Hornady XTP bullets (JHP) and Accurate #9 powder. After looking at several other loads using different bullets, I decided on a starting point of 19 gr. These loads seem to work pretty good. They seem fairly accurate and show no signs of high pressure or any other damage.Now I'd like to try increasing the load a bit.How much should I increase the powder each time? (1/10gr., 3/10 gr., 5/10gr.?)
Dgremlin is offline  
Old March 5, 2005, 09:03 AM   #2
STEVE M
Senior Member
 
Join Date: February 7, 1999
Location: TN. USA
Posts: 607
When working up a load I generally go up either 1/2 a grain at a time until I

am within 1 grain of max. Then if I still want more I go up in 1/10 or 2/10

incriments until I get the velocity I want or am within 2/10 grain of max.

(that's as heavy as I will load most calibers).

YMMV
__________________
MOLON LABE!
I've joined the 300.
STEVE M is offline  
Old March 5, 2005, 07:22 PM   #3
Kamicosmos
Senior Member
 
Join Date: January 31, 2002
Location: Kansas City, Missouri
Posts: 193
I use WC820, which is a military pulldown version of AA#9. I use 19 grains as well for my 240 grain .44 Mag loads.
I started a lot lower, like 16 or so, and I really like it at 19 grains. Burns good and consistant, mild recoil, accurate. Can shoot it all day.

Steve M gave some good advice for working up the load.
__________________
"Dreams only have meaning because we struggle in the waking world."

-- Major Motoko Kusanagi GitS:SAC

Member of NRA and Western Missouri Shooters Alliance
Kamicosmos is offline  
Old March 12, 2005, 08:31 AM   #4
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,139
learned

I use .2g increments without exception; I have observed minor charge changes go bad.
Not often, not never, either.
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:00 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09715 seconds with 7 queries