|February 12, 2005, 02:01 PM||#1|
Join Date: February 7, 2001
Location: Gaithersburg Md
Husqvarna M1907 hammer parts
I transferred a very nice 1907 to a C&R friend in Oregon. The hammer was
jammed, and when he took it apart he found a a broken "roller" on the hammer
and that would not allow the sear to disengage from the hammer. I assume he
needs only the roller but he may need a hammer, too. Any idea where he can
get those parts?
I assume the Husqvarna 1907 has the same specs and uses the same parts as
the Browning 1903 it is licensed from but I need someone knowledgeable to
confirm that. Numrich lists the Browning parts, subject to availability
For reference, pages 36/37 of the NRA Firearms Assembly book shows the four
part assembly to consist of hammer, spring, roll and roll pin.
Thanks, Herb Fredricksen
|Thread Tools||Search this Thread|