The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old June 10, 2008, 05:37 PM   #126
wewa79797979
Junior Member
 
Join Date: June 10, 2008
Posts: 4
Nylon 66 disassembly/assembly

Would greatly appreciate those instructions as well. Took apart because bolt handle broke off, ordered part, disassembled. WRONG! My E-mail is commander_perry@yahoo.com
wewa79797979 is offline  
Old July 2, 2008, 04:53 PM   #127
samco
Member
 
Join Date: September 27, 2007
Location: Brentwood,Ca.
Posts: 32
nylon 66

Hi Harley

Just got a nylon 66 given to me. need instructions bad. Thanks so much. Samco

ssamco1@aol.com
samco is offline  
Old July 3, 2008, 11:19 AM   #128
twiztedmike
Junior Member
 
Join Date: July 3, 2008
Posts: 1
need disassemble help

i recieved a nylon 66 that has been collecting dust for years i am needing the instructions to break it down and clean it..... thank you.... You can email me at mikeheilman81@yahoo.com
twiztedmike is offline  
Old July 3, 2008, 12:04 PM   #129
montveil
Member
 
Join Date: February 14, 2008
Location: NC mountains-Boone
Posts: 38
nylon 66 service manual

I have both the dissassembly and field service manuals for the nylon 66 BUT they are too large foe this sites attachments

Ant suggesti0ons

montveil
montveil is offline  
Old July 3, 2008, 12:11 PM   #130
montveil
Member
 
Join Date: February 14, 2008
Location: NC mountains-Boone
Posts: 38
nylon 66 info

go to nylonrifles.com
montveil is offline  
Old July 3, 2008, 02:26 PM   #131
model18
Senior Member
 
Join Date: March 14, 2006
Posts: 413
nylon 66

Careful boys. Those Nylons are a nightmare to reassemble. Loved mine till it got burned up in a fire and would buy another in a heartbeat!
model18 is offline  
Old August 22, 2008, 07:59 AM   #132
Balltease
Junior Member
 
Join Date: August 22, 2008
Posts: 2
Need Reassembly Instructions PLEASE!!!!!

Picked up a nylon 66 for $20. Great shape but the thing was probably never ever cleaned,,,,,,so yah,,,, I broke it all the way down for a thorough cleaning and now need some instructions. Please send to:

xtremesurfercop1@yahoo.com

Thanks, Tim
Balltease is offline  
Old September 11, 2008, 12:32 AM   #133
Chuck Brioschi
Junior Member
 
Join Date: September 11, 2008
Posts: 1
Remington Model 66

I could use assembly and disassembly instructions for the Model 66. I also would like suggestions on mounting a scope. I have mounted one and can't seem to shoot an acceptable grouping at 50 yds. I have had others fire it and they have the same results. Are there some special rings to use?

e-mail: cbrioschi@aol.com

Last edited by Chuck Brioschi; September 11, 2008 at 10:51 PM. Reason: add e-mail
Chuck Brioschi is offline  
Old September 12, 2008, 10:53 PM   #134
b.thomas
Senior Member
 
Join Date: October 8, 2006
Posts: 314
go here then save to your hard drive!
http://www.nylonrifles.com/NylonRifles/Documents.html
b.thomas is offline  
Old April 2, 2009, 04:52 PM   #135
vettezr1
Junior Member
 
Join Date: April 2, 2009
Location: michigan
Posts: 1
Remington model 66 reassembly

I just got a model 66 that was not taken care of at all. I took it apart and cleaned it up and I would appreciate it if anyone could send me reassembling instructions.
vettezr1 is offline  
Old April 3, 2009, 05:10 PM   #136
montveil
Member
 
Join Date: February 14, 2008
Location: NC mountains-Boone
Posts: 38
look in rimfirecentral.com
You can get schematics from Remington
There is a small lever shown on the schematic that seems to go under a spring loaded piece-- this lever should go above the other piece so it is under spring tension before you replace the pin
This firearm does not need much lubrication, and none on the nylon parts.
I however, use a Teflon dry lube on all the parts.
Have fun, it's a great little 22. maybe not the most accurate but a great shooting piece.
A world record was set back in the 60's from a Remington nylon 66 shooter when he hit 200,000 2X2 wood blocks tossed into the air. The rifle was not cleaned during the feat.
As a plinker and hunter under 50 yards it is great. Also a great beginning rifle as it weighs only 4 1/2 pounds.
I had a problem holding a scope on the grooved sheet metal receiver but I finally got a pair of Weaver grooved receiver to Weaver dovetails and that seemed to solve the problem
montveil is offline  
Old April 3, 2009, 05:13 PM   #137
montveil
Member
 
Join Date: February 14, 2008
Location: NC mountains-Boone
Posts: 38
OK with the Nylon rifle site< I used to visit it regularly but the site went down for some time and I gave up on it. It is the premium site fore the nylons
montveil is offline  
Old April 6, 2009, 01:17 PM   #138
rmooney
Junior Member
 
Join Date: April 6, 2009
Posts: 1
would like disassemble/reasemble instructions for rem nylon 66 thanks in advance
rmooney is offline  
Old April 6, 2009, 01:34 PM   #139
montveil
Member
 
Join Date: February 14, 2008
Location: NC mountains-Boone
Posts: 38
see above
montveil is offline  
Old June 19, 2009, 11:49 AM   #140
dddowning
Junior Member
 
Join Date: June 19, 2009
Posts: 1
would like disassemble/reasemble instructions for rem nylon 66
Thank You
dddowning is offline  
Old June 21, 2009, 01:59 PM   #141
montveil
Member
 
Join Date: February 14, 2008
Location: NC mountains-Boone
Posts: 38
try --http://rimfirecentral.com/
montveil is offline  
Old June 21, 2009, 04:27 PM   #142
lockdown96
Junior Member
 
Join Date: June 21, 2009
Posts: 2
need help also

I need to know how to break down this gun too. My sons Grandfather left it to him , it is jamming cause of beening dirty. Help please.
lockdown96 is offline  
Old June 23, 2009, 04:15 PM   #143
montveil
Member
 
Join Date: February 14, 2008
Location: NC mountains-Boone
Posts: 38
Check Nylonrifles.com
Everything you want to know about those nylons
montveil is offline  
Old June 30, 2009, 07:51 PM   #144
Lawrence
Junior Member
 
Join Date: June 30, 2009
Posts: 1
Remington Apache 77

Are there replacment magazines or clips for the plastic ones that came with the Apache 77? Any generic clip ou there? Trying to find one. Thx.
Lawrence is offline  
Old July 4, 2009, 06:11 AM   #145
gun44
Senior Member
 
Join Date: August 17, 2007
Location: Georgia
Posts: 125
I believe there are a couple of Youtube clips........

on disassembly and reassembly of these rifles.
gun44 is offline  
Old July 4, 2009, 06:27 AM   #146
tomgun
Senior Member
 
Join Date: September 19, 2008
Location: penna,no wait state
Posts: 187
here it is

http://www.youtube.com/watch?v=1syvtFfpzlw
tomgun is offline  
Old October 30, 2009, 01:03 AM   #147
JacksBrat
Junior Member
 
Join Date: October 30, 2009
Location: Ohio
Posts: 2
Parts Website for Nylon 66 and 76

While reading the threads for the manual for the Nyon 66 someone had asked where they could purchase parts for the 66 and 76. I came across the website below. It looks like it would be a good site for parts.

http://www.gun-parts.com/remington22rifle/

I hope this helps.

Jacks Bratt
JacksBrat is offline  
Old October 30, 2009, 01:46 AM   #148
JacksBrat
Junior Member
 
Join Date: October 30, 2009
Location: Ohio
Posts: 2
Manuals for Nylon 66

I have the manuals in a PDF format but this system will not allow me to upload the document it is too large. If you would like the manuals (3) please post your email and I will send them to you.
JacksBrat is offline  
Old October 30, 2009, 01:47 PM   #149
langenc
Senior Member
 
Join Date: August 19, 2007
Location: Montmorency Co, MI
Posts: 1,187
There must be thousands of them out there-rarely shot and never cleaned.
langenc is offline  
Old December 24, 2009, 01:32 PM   #150
dondavis3
Senior Member
 
Join Date: August 20, 2009
Location: Dallas / Fort Worth Area
Posts: 671
I do not mean to be a grump or smart butt on Christmas eve, but if it ain't broke don't mess with it

Just kidding - we all need to clean our guns - but some guns are a bitch to clean and those guns that are mine just don't get cleaned that much.

I've shot a million shots through my Nylon 66




Well maybe not a million
__________________
Don Davis
dondavis3 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.13256 seconds with 7 queries