The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old April 24, 2006, 09:15 PM   #51
onebohemian
Member
 
Join Date: April 19, 2006
Posts: 17
Although I honestly believe that Harley doesn't mind all the requests for the 66 instructions, I thought I'd offer a little info I learned about the Remington Nylons (after I too got the manual from Harley).

There's a yahoo group called "nylonrifles." If you join it, they have a number of "files" available online, including .pdfs of articles about these guns, tear down instructions, parts suppliers, tips to cleaning and repair, etc. It just doesn't cover the 66 either but all the nylons--e.g., 76, 10, 11, 12, etc. Worth checking out if you're in the hunt for some specific piece of information.

On behalf of all of us nylon 66 owners who have received the instructions from Harley, here's to ya! Thanks. You gave us that hope we needed after we each brazenly (a/k/a stupidly) tore our rifles down before we knew exactly what the heck we were doing. You saved us all when we each thought we'd done the unspeakable -- permanently ended the life of a favorite plinker. Please don't take my post here recommending another source of information the wrong way. I'm confident you'll still be the go-to guy for lots of future nylon owners as the FiringLine is a great site. Maybe this will let you take a little, well-deserved breather for awhile though--at least from the nylon guys.

Mark
onebohemian is offline  
Old June 1, 2006, 12:04 PM   #52
secondamendmentguns@
Junior Member
 
Join Date: June 1, 2006
Location: Pinehurst, ID
Posts: 1
Nylon 66

I got the whole thing back together but the sear dosn't work right and the cartrige cutoff spring is in wrong I think. Can you send a detailed instruction for dis/reassembly
__________________
Support the 2nd amendment so we can protect the rest
secondamendmentguns@ is offline  
Old June 17, 2006, 05:58 PM   #53
cactusmike4
Junior Member
 
Join Date: June 17, 2006
Location: Pennsylvania/Maryland
Posts: 3
Please Help!! Remington 66 Assembly Instructions Needed!!

If anyone still has these instructions, please email them to me at

mandmpiercy@juno.com. thank you.

PS. Is there anywhere they can be posted on the forum? Considering all the requests, it may not be a bad idea.
cactusmike4 is offline  
Old June 23, 2006, 08:57 AM   #54
cactusmike4
Junior Member
 
Join Date: June 17, 2006
Location: Pennsylvania/Maryland
Posts: 3
Reminington 66 instructions

Harley,

A big thanks for sending the instructions. Unfortunately, I left them on my email account the night you sent them and my wonderful wife who did not recognize your name deleted the email a day later and sent it to the trash bin.
If there is anyway you please could be so kind as to send those directions one last time, I will print them off the moment they arrive and never (I realize this is a dangerous word to use) ask for them again.

mandmpiercy@juno.com

Thanks

cactusmike
cactusmike4 is offline  
Old July 9, 2006, 07:30 PM   #55
Chuck 651
Junior Member
 
Join Date: July 9, 2006
Posts: 1
nylon 66 manual

Hello Harly,

Can I get one of your assembly/disassembly manuals fro the Nylon 66 sent to me, too?

Thanks,

Chuck 651
Chuck 651 is offline  
Old July 10, 2006, 01:10 PM   #56
1reb
Junior Member
 
Join Date: July 10, 2006
Location: arkansas
Posts: 1
need these directions as well

Can some one send me the directions on the nylon 66.
i just got the gun and the owner told me he try to take the gun apart and lost a spring.
please send to
gunsmithintraining@yahoo.com
thank you
Johnny
1reb is offline  
Old July 10, 2006, 11:15 PM   #57
heartrock
Junior Member
 
Join Date: July 10, 2006
Posts: 1
nylon 66 disassembly

Would you be so kind to forward me the assemble/disassemble instructions for the nylon 66. My dad bought this rifle for me 40 years ago. I burnt a many a shell through it as a youth, but it hasn't been used in quite some time and I would like to clean it up and get it ready to pass along.
heartrock is offline  
Old July 17, 2006, 03:57 AM   #58
Wasper
Member
 
Join Date: July 13, 2006
Posts: 56
Just my two cents

The Nylon's trigger group is quite unique. I detail cleaned a Nylon 66 for a friend about 15 years ago. I saved the slave pins that I used to reassemble it with, just in case I had to tackle another one someday. Although I figured out the dis/re-assembly, I sure could have used some instructions back then!
Wasper is offline  
Old August 31, 2006, 10:26 PM   #59
unoactu
Junior Member
 
Join Date: August 31, 2006
Location: Colorado
Posts: 4
HARLEY ! Can I please get the assembly/disassembly instructions for the Nylon 66 ? I have aquired one that I want to clean before I teach firearms safety with my son. Thank You ! Please send to; jccooper69@msn.com
unoactu is offline  
Old September 1, 2006, 09:40 AM   #60
unoactu
Junior Member
 
Join Date: August 31, 2006
Location: Colorado
Posts: 4
THANK YOU HARLEY !
unoactu is offline  
Old September 2, 2006, 04:41 PM   #61
deruncle
Junior Member
 
Join Date: September 2, 2006
Posts: 1
nylon 66 instruction

Can I get a copy of nylon 66 assembly. My barrel is just a little loose from the stock.
deruncle is offline  
Old September 11, 2006, 02:20 PM   #62
peak129
Junior Member
 
Join Date: September 11, 2006
Posts: 1
Nylon 66

disassembled my Nylon 66 so I could clean it and now I cannot get it back together. If anybody has any advice or even a schematic/picture or anything that might help I would really appriciate it.

My email is peak129@yahoo.com
peak129 is offline  
Old September 29, 2006, 01:02 AM   #63
DocZinn
Junior Member
 
Join Date: September 29, 2006
Posts: 3
Hey, guess I'm a newb here, but I've been over at THR for a while.

Just bought a NIB Nylon 66 for a song and would like to check it out before firing it. Add me to the begging crowd for the dis/ass instructions, please.

drzinn@gmail.com
DocZinn is offline  
Old September 29, 2006, 03:57 AM   #64
Harley Nolden
Staff In Memoriam
 
Join Date: January 8, 1999
Location: Brunswick,GA USA
Posts: 1,884
What was the name of the song?

HJN
Harley Nolden is offline  
Old September 29, 2006, 08:42 AM   #65
DocZinn
Junior Member
 
Join Date: September 29, 2006
Posts: 3
Ninety bucks.

And thanks a lot for the instructions, Harvey.
DocZinn is offline  
Old October 17, 2006, 09:21 PM   #66
sdenis1
Junior Member
 
Join Date: October 17, 2006
Posts: 1
I'm new to the site, but I have a Nylon 66 from my father. I shot through it when I was a kid and my dad cleaned it and could never get it back together. It's now in my posession, and I'd LOVE to show my son how to shoot with it.

Would you please send me the instructions to assemble it?

Thanks

JSDenison@netzero.com
sdenis1 is offline  
Old October 18, 2006, 01:09 PM   #67
jbondor
Junior Member
 
Join Date: October 18, 2006
Posts: 11
Also need assembly instructions

My nylon 66, bought new years ago, rarely cleaned, started failing to feed properly. Took it apart - sure lots of parts - and need help. I would greatly appreciate assembly/disassembly instructions. I will gladly provide reimbursement of costs, etc. Thanks. This thread is refreshing and very helpful. I am relieved to see I'm not the only one in trouble.
jbondor is offline  
Old October 21, 2006, 08:37 PM   #68
anti-foaming
Junior Member
 
Join Date: October 21, 2006
Posts: 1
Nylon 66

Hey Harley, think I could get a copy of the dis/ass procedure.
Thank You,
e.w.r@hotmail.com
anti-foaming is offline  
Old November 6, 2006, 04:28 PM   #69
plinkin
Junior Member
 
Join Date: October 6, 2006
Posts: 1
Nylon 66

Harley, I have to ask also, can I get a copy of those assembly / disassembly proceedures. thanks in advance.
arcioni53@yahoo.com
plinkin is offline  
Old November 7, 2006, 08:59 AM   #70
drizzle
Junior Member
 
Join Date: October 17, 2006
Posts: 9
Hi

I just picked up a Model 66 that looks like it has a broken firing pin. Would you please send me the disassembly/assembly instructions.

Thank you!

drizzle
drizzle is offline  
Old November 13, 2006, 07:05 PM   #71
shooter76
Junior Member
 
Join Date: November 13, 2006
Location: missouri
Posts: 3
add me to the list. took it apart to clean....like many others.....and now i have not idea how to put this monster back together. thank god i found this thread. Harley....I would greatly appreciate those reassembly instructions. thank you in advance.....a real life saver!!!
shooter76 is offline  
Old November 14, 2006, 11:07 PM   #72
76r
Member
 
Join Date: November 14, 2006
Location: Northern Alberta, Canada
Posts: 23
I hate to join in so late in the game but...
Could you please send me a copy of the Diss/Ass instructions for the #66
Mr. Nolden. (Mine was taken apart in1981, and the parts were misplaced in a move and relocated only recently. A truly joyous occasion!)
Thank you for your assisstance.
76r is offline  
Old November 14, 2006, 11:27 PM   #73
DocZinn
Junior Member
 
Join Date: September 29, 2006
Posts: 3
D'oh!

I just reread my post and realized I typed "Harvey".

Sorry, Harley. Fat fingers.
DocZinn is offline  
Old November 16, 2006, 10:51 AM   #74
ralammers
Junior Member
 
Join Date: November 16, 2006
Posts: 1
Hello Harley,

There is one more who would like to jump in line for those instructions for the Nylon 66. If you could please send them when you have time.
Thanks,
Ross
rosslammers@yahoo.com
ralammers is offline  
Old November 23, 2006, 09:15 AM   #75
genehjelm
Junior Member
 
Join Date: November 23, 2006
Posts: 1
Hi, I'm also in desparate need of these instructructions. Very new to this thread stuff though. Also have been all over the internet and calling around the country looking for a replacement stock for my beloved Nylon 66. Very appreciative in advance for any and all help. genehjelm@hotmail.com

Last edited by genehjelm; November 23, 2006 at 09:16 AM. Reason: add email
genehjelm is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.14927 seconds with 7 queries