The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools
Old November 26, 2004, 01:40 PM   #1
lil_bro
Senior Member
 
Join Date: November 26, 2004
Location: Oklahoma.
Posts: 395
I.N.A. 5 shot .38 special revolver.

Hi, I am new to this forum and I need some info on a 38 special revolver. It is a double acton 5 shot .38 special revolver that has checkered hard wood grips and a 4" barrel. I need any info(i.e.current manfacture,framestyle size,will it accept .357 mag etc.) On the left side of the revolver it has a engraved tiger.And on the right side of the revolver it reads "I.N.A. made in brazll".And on the right side of the barrel it reads ".38 special".On both sides of the grips it reads "INA ind nac de armas brasil".On the very bottom of the grips it has the numbers "030126".And on the inside of the frame it has the numbers "575" and a 9 below the last 5. Again any info would be greatly appreciated. Thanks,Michael
lil_bro is offline  
Old November 26, 2004, 01:47 PM   #2
WillBrayjr
Junior member
 
Join Date: September 26, 2004
Location: Northern Indiana
Posts: 1,881
Probably a Taurus or a Rossi. I don't know much about revolvers, but I do know that Taurus and Rossi are made in Brazil!
WillBrayjr is offline  
Old November 26, 2004, 04:47 PM   #3
Sir William
Senior Member
 
Join Date: October 13, 2004
Posts: 3,261
PASS! It is a POJ. It WILL NOT accept 357 Magnums, don't even try it. I believe these were a sort of effort to make a snub 38 Special. I would not trust one anymore than I would a $10.00 Rohm.

Last edited by Sir William; November 26, 2004 at 04:52 PM. Reason: Better info
Sir William is offline  
Old December 1, 2004, 02:02 PM   #4
SmokinTom
Senior Member
 
Join Date: November 29, 2004
Location: Ohio
Posts: 382
As Sir William said,PASS. NO NO NO. Pass it up. Boy,that was close. We thought you already bought it.
SmokinTom is offline  
Old December 2, 2004, 10:09 PM   #5
lil_bro
Senior Member
 
Join Date: November 26, 2004
Location: Oklahoma.
Posts: 395
Well my father bought the gun about 35 years ago for 39.95 at the local grocery store and i was just trying to find some info on it.

P.S. Thanks a lot for the info and also could you recommend a good .38/.357
and the price?.


Thanks,Michael.
lil_bro is offline  
Old December 2, 2004, 10:20 PM   #6
keko
Senior Member
 
Join Date: November 14, 2004
Posts: 211
S&W "J"frame series...

They come in very light weight models. Small, five shot. I would recommend a internal hammer model.

I personally have a 642 model, which is a .38 special + P model...sort of like a baby .357 round.

The "J" frame series also has .357 and .38 specials.

Nice little guns
keko is offline  
Old December 2, 2004, 11:27 PM   #7
Sir William
Senior Member
 
Join Date: October 13, 2004
Posts: 3,261
The area of concern is the internals and springs. They had a tendency to get out of time, freewheel and they are not able to withstand modern +P loads. I suggest shopping for used M&P S&Ws or Ruger GP-100s. Either are high quality revolvers and should be priced about $300.00. A fair cheap revolver would be the Commanche, they do need some rough spots smoothed though. A nice and lower priced used 5 shot revolver I can suggest is the M85 Taurus 38 Special, used ones run about $199.00. THE small 357 Magnum suggestion would be the Ruger SP-101.
Sir William is offline  
Old December 3, 2004, 02:27 AM   #8
S_O_Laban
Member
 
Join Date: May 17, 2004
Location: somewhere near Independence MO
Posts: 33
Quote:
I suggest shopping for used M&P S&Ws or Ruger GP-100s.
+1 Good advice.
S_O_Laban is offline  
Old December 3, 2004, 02:32 AM   #9
Sir William
Senior Member
 
Join Date: October 13, 2004
Posts: 3,261
12 IS more than 10! 6 in the cylinder and 6 in a speedstrip. Bianchi speedstrips conceal easily.
Sir William is offline  
Old December 6, 2004, 05:03 PM   #10
lil_bro
Senior Member
 
Join Date: November 26, 2004
Location: Oklahoma.
Posts: 395
Thanks a lot for the info.


P.S. Look like I have some gun shopping to do.


Thanks, Michael.
lil_bro is offline  
Old December 7, 2004, 11:37 AM   #11
almtiba
Senior Member
 
Join Date: May 23, 2004
Location: Sao Paulo / Brazil
Posts: 190
Hi,

This is a very popular revolver here in Brazil.

I.N.A. means Industria Nacional de Armas (National Arms Industry) and it became famous in the 60' for producing for the police, the INA Sub Machine Gun, in .45 ACP, that was a clone of the Madsen. (Very reliable, btw).

They tried to make a revolver, with a reasonable price to the police, so they entered the revolver business. Their products were not well accepted, by the force, specially the .38's.

Since we only had Taurus and Rossi, and imported revolvers were to expensive, the INAs, especially the .32, became very popular among security guards (not police) and civilians, that wanted to have a gun in house for an emergency, but never uses it... , or they were sold as "Saturday Night Specials" (we don't use the expression here, but we had he guns... )

The sad news are that here in Brazil, they are abundandt, and don't really worth something and DON'T EVEN TRY .357S ON IT !!! Not even +P...

Hope it helps a bit,

Regards,

Andre Tiba - Brazil
almtiba is offline  
Old October 21, 2014, 07:34 PM   #12
B.A.D.
Junior Member
 
Join Date: October 21, 2014
Posts: 2
I.N.A. 5 shot .38 revolver

Andre Tiba - Brazil, I also have one of these pistols since yesterday when it was given to me me. It also has a broken firing pin. Can you tell me if there are any sources down there where I might get a couple of them? I would gladly pay your time. Thanks, ben
B.A.D. is offline  
Old October 21, 2014, 08:00 PM   #13
subhuman
Senior Member
 
Join Date: April 21, 2013
Posts: 175
B.A.D. this post is 10 years old dude, as for that piece of junk somebody gave you take it to the local welding shop, weld the cylinder shut and throw it away. take $300-400 go to a pawn shop and buy a used Ruger or S&W.
subhuman is offline  
Old October 22, 2014, 01:06 AM   #14
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 7,118
For all you guys who give opinions, but have no idea what you're talking about: The INA Tiger guns were slightly crude, but they were all steel guns of about the same quality of Rossis of the same era.
__________________
Bill DeShivs
www.billdeshivs.com
Bill DeShivs is offline  
Old October 22, 2014, 03:49 AM   #15
volkstrm
Member
 
Join Date: November 10, 2007
Posts: 99
Hello There Lil Bro,

I would say the Ruger sp101 or the Ruger GP100.
volkstrm is offline  
Old October 22, 2014, 05:45 AM   #16
Snyper
Senior Member
 
Join Date: December 16, 2013
Location: Eastern NC
Posts: 543
You could also save it until some do-gooders have a "gun buy back" and maybe get far more than it's worth to put towards the purchase of a real gun
__________________
One shot, one kill
Snyper is offline  
Old October 22, 2014, 08:02 AM   #17
lee n. field
Senior Member
 
Join Date: October 12, 2002
Location: The same state as Mordor.
Posts: 3,344
What is it with thread necromancy, lately?
__________________
"As was the man of dust, so also are those who are of the dust, and as is the man of heaven, so also are those who are of heaven. Just as we have borne the image of the man of dust, we shall also bear the image of the man of heaven. "
lee n. field is online now  
Old October 22, 2014, 08:07 AM   #18
2ndsojourn
Senior Member
 
Join Date: January 15, 2013
Location: South Jersey
Posts: 670
What Snyper said. Wait for a gun buy-back in your area and get a few bucks for it to put towards something else.
(Yeah, I see this is an old thread, I'm just answering B.A.D.)
2ndsojourn is offline  
Old October 22, 2014, 08:39 PM   #19
Snyper
Senior Member
 
Join Date: December 16, 2013
Location: Eastern NC
Posts: 543
Quote:
What is it with thread necromancy, lately?
It's a brand new thread to someone who just joined
__________________
One shot, one kill
Snyper is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10127 seconds with 7 queries