The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old October 22, 2004, 08:59 PM   #1
Georgian
Senior Member
 
Join Date: October 12, 2004
Location: SE Georgia
Posts: 142
Looking for a good inexpensive BP Revolver

Hey yall. I am thinking of making a start in BP, and was wanting to get me a good BP revolver. As of right now I favor the 1851 Navy, but I really need some info on different types like the 1860 Army, 1858 Remington, etc. Any replies would be greatly appreciated.
__________________
~"Speak softly and carry a big stick"~T. Roosevelt

God Bless
Georgian is offline  
Old October 22, 2004, 09:54 PM   #2
Sir William
Senior Member
 
Join Date: October 13, 2004
Posts: 3,261
www.dixiegunworks.com AVOID Armi San Marcos manufactured revolvers. Piettas are improving. Uberti is about the top in consistent quality. The Navies are 36 and 44 caliber. The Armies are 44 caliber. Opentops and therefore they can jam on caps stuck/dropped in the action. The only wy to remove their cylinders is to tap out their wedges and disassemble. If you tap the wedge in too much, you lock up the actions or create binding. The Remingtons are a heavier, topstrap=reinforced frame revolver. They are easier to clean, remove and swap cylinders and even can have adjustable sights from the factory. The Ruger Old Army and the Remingtons are also easier conversions to 45 Long Colt because of their simple to swap cylinders.
Sir William is offline  
Old October 23, 2004, 12:55 PM   #3
Tom2
Senior Member
 
Join Date: June 23, 2004
Location: Ohio
Posts: 5,648
Uberti Remington

I have a Remington from Uberti. Have to say that it is the best production model from a finish standpoint, but I refitted and refinished the grips to look better. Don't necessarily care for the dovetailed in bases for the sight and the loading lever catch. Pietta makes one Remington for target work that is above the standards of their regular models, but the cost reflects it. BP revolvers vary in quality of finish so much from gun to gun that I like to see the actual gun myself before commiting. Same maker gun might have poorly fit grip frame and the next perfect. All brands apply, even 2nd. gen Colts.
Tom2 is offline  
Old October 24, 2004, 02:45 PM   #4
mec
Senior Member
 
Join Date: December 6, 2001
Posts: 1,530
The current Ubertis are very well made and can be had in the low 200 dollar range. Pietta seems to have installed CNC machinery and recent issue may have improved.
mec is offline  
Old October 24, 2004, 09:37 PM   #5
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 16,849
I prefer Ubertis over other makes (if foreign).
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old October 29, 2004, 06:09 PM   #6
Gunsmith4570
Junior Member
 
Join Date: August 24, 2004
Posts: 5
Inexpensive BP Revolver

At the present time I have two a cabelas 1851 steel frame navy colt .36 and a cabelas remmington New Police .36 (I the 36's) Personally I like both and would not give up either. I like the quickness of the remmington and the way it handles, and everyone will tell you about the handling of the '51 navy. On the other hand for long range (75yards plus) I use the navy instead of the solid frame remmington, for what ever reason, I shoot more accurately with the navy (been using one since I was 18 that might have something to do with it) but I still will not take for either of them.
Gunsmith4570 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08250 seconds with 9 queries