The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old November 28, 2002, 10:03 AM   #1
fobb
Junior Member
 
Join Date: July 10, 2002
Location: ky
Posts: 4
45 long colt

I need a little help.I have a ruger vaquero in 45 long colt.I have reloaded it with sierra 240 gr they have a diamater of .4515.Now i just purchased some 250 gr. cast bullets but they are .454. My question is will they work.Thanks
fobb is offline  
Old November 28, 2002, 10:27 AM   #2
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,270
YES

But don't try launching them at escape velocity; TiteGroup, Universal Clays, W231...........
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old November 28, 2002, 10:58 AM   #3
NG Bruce
Member
 
Join Date: February 2, 2001
Location: Greenville NC
Posts: 51
Fobb, as WS2 said, use light loads. For CAS I use 6.0 grains of Titegroup or 6.4 grains of HP38 (very similar to Winchester 231) and a standard large pistol primer with a 250 grain lead RNFP. I shoot them in two Blackhawks and in a US Firearms Rodeo. These loads will work fine with a .454 size bullet. NG Bruce
NG Bruce is offline  
Old November 29, 2002, 06:46 PM   #4
Husky
Junior Member
 
Join Date: October 25, 2002
Location: Jersey shore
Posts: 10
Thanks for the post and advice!

Three years ago, I accidently purchased some .454 250 grain lead bullets in 45 Colt. Now I have 500 more rounds I can load.
Husky is offline  
Old November 29, 2002, 09:16 PM   #5
LAH
Senior Member
 
Join Date: March 22, 2002
Location: In The Hardwoods
Posts: 950
Try 4 or 5 grains of Bullseye.
LAH is offline  
Old November 30, 2002, 05:48 AM   #6
Hal
Senior Member
 
Join Date: October 9, 1998
Location: Ohio USA
Posts: 7,435
It would probably be a good idea to slug the chambers and the barrel too. I think there's some unwritten "code" or somethng that says the .45LC has to be all over the place sizewise.
Hal is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:22 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10336 seconds with 9 queries