The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old November 25, 2002, 12:11 AM   #1
Drivie
Member
 
Join Date: September 17, 2002
Location: Scottsdale, AZ
Posts: 26
What determines shell length acceptance?

I'm wondering if it's the barrel or the receiver that determines whether a shotgun can handle 2.75" and 3" shells? Sorry if this is a really stupid question.

Thanks for your help!

Drivie
Drivie is offline  
Old November 25, 2002, 01:29 AM   #2
Redlg155
Senior Member
 
Join Date: March 13, 2001
Location: NW Florida
Posts: 2,307
As I understand it, it is the reciever type that determimes whether or not you can use just 2 3/4 or both. I'll use the warning in the Cabelas Catalog section concerning the Remington 870 Shotgun.
Barrels with 3" chambers will fit both magnum and 2 3/4" recievers and will handle both 2 3/4" and 3" shells with the magnum reciever. (An M at the end of the serial numer=Magnum Reciever). Use only 2 3/4" shells when barrrels are used on 2 3/4" recievers

Now check out the Model 1100 warnings.
All barres have 2 3/4" chambers (except steel shot barrel). 1100 steel shot barrel- Used with non-magnum reciever you can shoot 2 3/4 magnum lead or steel or 3" magnum steel shotshells. DO NOT USE 3" mag lead. Used with a magnum reciever, you can shoot 2 3/4 mag or 3"mag lead or shotshells.

It seems to me that at least for Remington, the reciever rating determines what you can use even if your barrel is a 3" chamber.

Good Shooting
RED
Redlg155 is offline  
Old November 25, 2002, 02:59 AM   #3
Kevlarman
Senior Member
 
Join Date: November 21, 1999
Location: Riverside, CA
Posts: 131
I think it's both.

Not only does the shell have to fit in the chamber properly, it also has to be able to fit thru the ejection port after firing.
__________________
Si vis pacem, parabellum.
MOLON LABE!
Kevlarman is offline  
Old November 25, 2002, 06:23 AM   #4
Dave McC
Staff In Memoriam
 
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,812
Both....

Yhe chamber has to be long enough for the crimp to open fully. Otherwise, pressure rises and the pattern goes to Heck.

The receiver has to be long enough to work the longer shell through the firing cycle.

And the only really stupid questions are those that do not get asked...
Dave McC is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06444 seconds with 7 queries