The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old October 6, 2002, 07:24 AM   #1
Swamp Yankee
Senior Member
 
Join Date: November 26, 2000
Location: Northeastern Ct.
Posts: 1,013
Help With a Used Dillon XL650

I found a used Dillon XL 650 press for $300.

It includes the low powder sensor & bullet trays. It is currently set up for 9mm which is the volume cartridge I reload, that and .223.
In any event, the machine appears in good shape, but never having owned or used a progressive before I need some help as to what to look for as possible problems or areas of concern on the machine. I prefer not to purchase someone elses headache if you catch my drift.
I know Dillon has an excellent service department. I'm of the opinion this machine is one purchased, never or hardly ever used that became trade fodder on a new gun.
Second question how well does the 650 do on .308 and .223 rifle ammo. I would assume that using a ball powder is probably recommended.
As always, Thanks in Advance for the responses.
Take Care
Swamp Yankee is offline  
Old October 6, 2002, 09:52 AM   #2
rick_reno
Junior member
 
Join Date: May 28, 2002
Location: Idaho
Posts: 917
used 650

I've loaded 223 on a 650 using W748 powder. Worked fine. I wouldn't worry about broken parts on it as much I would missing parts. Check it out to make sure it's all there.
rick_reno is offline  
Old October 6, 2002, 10:00 AM   #3
TIR
Member
 
Join Date: February 28, 2002
Location: Southern Michigan
Posts: 73
Does it come with the case feeder? I bought my 650 a month ago used it had been used quite bit the guy used to reload for our local police department with it. I bought the machine knowing that a few case feed pieces were worn out or broken I called dillon before hand and they sent me all the parts plus some spare ones I didn't ask for that was unbelievable. You can have the utmost confidence in buying the machine that Dillon will make it work right if it for some reason doesn't.

As far as 308/223 I have not reloaded either caliber but I have reloaded 243 on my 650, it worked great the leverage the machine has makes sizing a breeze. The lubed cases do get things a little messy so when your done clean the case feed system quite thoroughly. Oh and I only use H380 powder for the 243 which meters very consistently, haven't tried any extruded through the measure as of yet.
TIR is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07076 seconds with 7 queries