The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old September 13, 2002, 06:03 AM   #1
Khornet
Senior Member
 
Join Date: December 11, 2001
Location: NH
Posts: 585
Old K-Hornet

No, not me...I mean my Savage Model 219. This is a break-open single shot rifle I got from my brother years ago. The thing is, I've never been sure whether it's a .223 or .224 bore, though I have tried 'slugging' it with a pulled .22 rimfire bullet.

Any opinions on what it's likely to be, based on the model or other info?
__________________
The M1 does MY talking!
Khornet is offline  
Old September 13, 2002, 10:15 AM   #2
Poodleshooter
Senior Member
 
Join Date: August 7, 2000
Location: Floating down the James River in VA
Posts: 2,545
Probably a question for Harley's forum, but if it's older than 1940's, I'd guess .223.
Poodleshooter is offline  
Old September 13, 2002, 02:32 PM   #3
john kilgore
Senior Member
 
Join Date: August 27, 2002
Location: east georgia
Posts: 125
You probably won't get a good reading from a rim-fire bullet as they usually run about .222 to .2225. They depend on a cupped base and thin section of lead at the base for gas seal, and inertia and pressure obturation to grooves for accuracy. Best was to slug bore without using a cast bullet, is to get some fish sinkers slightly larger than the .22 bore and then run it through the bore. Like the other poster stated, if made prior to 1950, it may have a .223 bore, if after, probably a .224. It would behoove you to try both to see what shot better. I had a Ruger 77/22 Hornet that shot the .223's better, but was still a stinker. I traded for a 77/22 KBZ with heavy barrel- has much better chamber, but I still thing I'm going to send it to CPC Gunsmithing for the K-Hornet conversion and bolt tightening. I get some really great velocities, but the throat is really long and rough, although the body section is nice and tight, -accuracy is an off and on thing, usually better with deep seated bullets. A really good K-Hornet rework would give me near .221 Fireball velocities and better accuracy to boot.
Try the Hornady .223's and .224's and see which shoots better.
__________________
"There is no such thing as a second place winner in a gunfight" Bill Jordan
john kilgore is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:13 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05154 seconds with 7 queries