The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old August 17, 2002, 07:01 PM   #1
griz
Senior Member
 
Join Date: July 31, 2000
Location: Middle Peninsula, VA
Posts: 1,439
Question for bullet casters.

Which bullet lube smokes the least but still prevents leading?

I am shooting store bought bullets in my 45 and on an indoor range it gets cloudy fast. I'm hoping to cast my on and I'm looking for less smoke.

Thanks, griz
griz is offline  
Old August 17, 2002, 07:57 PM   #2
David Wile
Senior Member
 
Join Date: June 14, 2001
Location: Mechanicsburg, PA
Posts: 582
Hey Griz,

I have an indoor range in my basement, and I shoot a lot of bullets that I personally cast, size, and lube. In my experience, your choice of powder and the amount of powder have far more to do with smoking up the indoor range than cast bullet lube. I know that in my range, we can shoot .22 ammunition all night with very little smoke. As soon as we start shooting centerfire ammo, we have to start the ventilation fan. There is also a big difference between shooting a few grains of Bullseye in a .32 auto and shooting 14 grains of Bluedot in a 44 Mag. I use RCBS and Lyman bullet lubes for my cast bullets, but I personally do not think the lube has anything to do with producing enough smoke for one to notice. Powder is a different thing, however.

Best wishes,
Dave Wile
David Wile is offline  
Old August 17, 2002, 08:16 PM   #3
jjmorgan64
Senior Member
 
Join Date: August 8, 2001
Posts: 519
I really like the Lee liquiod alox lube, It doesn't give me much smoke.
__________________
The Forty-Four spoke and it sent lead and smoke
And seventeen inches of flame. -Marty Robbins

JM
jjmorgan64 is offline  
Old August 18, 2002, 08:56 PM   #4
cheygriz
Senior Member
 
Join Date: May 11, 2002
Location: high up in the rockies
Posts: 2,232
Try the "Zambini" from Rooster Laboratories.
__________________
If you think a mighty military force is expensive, wait 'til you see what a weak one costs.
cheygriz is offline  
Old August 19, 2002, 08:02 AM   #5
Pampers
Senior Member
 
Join Date: October 7, 2000
Location: In the Lost State of Franklin
Posts: 482
Precision Bullets

sells a cast bullet coated with a polymer substance which contains moly. No leading and precious little smoke.

I disagree with David Wile. Identical loads using the SAME powder & charge will smoke MUCH less with a jacketed bullet than with a lubed cast bullet. It's the lube, NOT the powder!

And by-the-way, there is a way to reduce the smoke from the lube of any cast bullet. That is an under bullet wad. I personally prefer P-Wads (Polypropolene) from NECO, aqnd have also had success with Wonder Wads' heavy wool underbullet wads. Felt, cardboard and plastic wads cut from milk jugs will also work.
__________________
Your Most Humble & Obedient Servant
Fred J. Drumheller
NRA Life
NRA Golden Eagle
Pampers is offline  
Old August 19, 2002, 10:07 PM   #6
Watchman
Junior member
 
Join Date: August 8, 2000
Location: ARKANSAS
Posts: 484
I use a "hot" lube.

Thompson's "Blue Angle" available from Midway .

You gotta have a heater plate to put your sizer on for it too work. I have found it to be better and more accurate than anything else on my cast bullets.

One advantage is it stays on and dose'nt melt if it gets hot out.

The guns seem to lead up less than with a soft lube.
Watchman is offline  
Old August 19, 2002, 11:23 PM   #7
labgrade
Member In Memoriam
 
Join Date: November 29, 1999
Location: west of a small town, CO
Posts: 4,346
Been using Lyman's Orange Magic lube - like it. .357s & .30 cal rifles. Need a warmer plate on your luber.
labgrade is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06958 seconds with 7 queries