The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old August 11, 2002, 11:45 AM   #1
warrior23
Member
 
Join Date: January 27, 2002
Location: N.Y
Posts: 29
Thompson Hawken 50

OK,I'm new to black powder so here it goes.I picked up a Thompson hawken 50 cal kit.I have to build this gun still, but I would like to know what powder I can use and rounds.Does anybody have a good combination for this gun that I can work with.thanks
warrior23 is offline  
Old August 11, 2002, 04:02 PM   #2
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 17,000
Any blackpowder (Goex, Elephant, Wang-o (sic)) will do. I would prefer 2F for a 50. As for combo, you have to find that out for yourself by testing loads and patches & powder charge.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old August 11, 2002, 06:54 PM   #3
Jimmy Mac
Senior Member
 
Join Date: June 30, 2002
Posts: 688
The TC Hawken is a fine rifle. It will give you years of service.

The TC has a 1-48 twist. This is supposed to allow good accuracy with both roundball and conical bullets.

The average TC will be very accurate with patched balls as long as the powder charge is kept reasonable. A ball may not be accurate with very heavy charges.

The conical bullets such as the TC Maxi Ball will be more accurate with heavy charges in most TC rifles.
Jimmy Mac is offline  
Old August 15, 2002, 10:30 AM   #4
jpm63
Member
 
Join Date: March 26, 2001
Location: Michigan
Posts: 75
I started with one of these . . . still have it.

I stuck with Roundball as the recoil was so much more pleasant. What worked for me was around 70 grains of GOEX (Pyrodex worked too) and a pillow ticking patch lubed with bore butter very sparcely. Accuracy and deer killing powder were very good to 75 yards. At 100 yards I though the accuracy was not good enough for me to risk a shot. Higher charges with roundball opened up the group.

If you want to experiment with conicals, stick with full bore ones as the twist won't work with the Sabots.

JPM
jpm63 is offline  
Old August 15, 2002, 05:40 PM   #5
warrior23
Member
 
Join Date: January 27, 2002
Location: N.Y
Posts: 29
Thanks everyone I finally got the kit together and now its just getting percussion caps and off to the range I go.
warrior23 is offline  
Old August 16, 2002, 08:59 AM   #6
scotjute
Senior Member
 
Join Date: December 6, 2001
Location: texas
Posts: 259
Warrior,
I have a TC New Englander .50 w/1 in 48" twist. I use 70 grains of FFF GO powder in it shooting 350 grain conical. Am using FFF because I already have it for pistol. With FF, you can load higher and it is the recommended powder for the gun.
scotjute is offline  
Old August 19, 2002, 11:06 AM   #7
Teltech
Junior Member
 
Join Date: August 1, 2002
Location: NY, USA
Posts: 13
Warrior23,

I have a TC Hawken and it's a great gun. Very accurate. I use 70 grains of FF and round ball too. Good choice IMHO.

Let us know how you did at the range.
__________________
Dont' Tread on Me
Teltech is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:00 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08344 seconds with 9 queries