The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 20, 2002, 08:52 PM   #1
bushmaster225
Member
 
Join Date: April 27, 2000
Location: Burlington, NJ
Posts: 48
Berry 124 RN, Which powder W231, Titegroup, HS-6 or #7

Titegroup is cheapest, I use 231 for my .45 and HS-6 for my .40 S & W.

I'm going to a gun show this weekend and I'm looking to pick up 8 lbs. What will give me the best load with Berry 124?

what oal are you using?

Next question. Which bullet is better considering the price difference.

All are 1000 124 gr RN

Rainier 35.99 (+ shipping) Dealer price
Berry 44.49 (Dbl struck) Free Ship
West Coast 46.00 Free ship
Monatana Gold 52.00 (Must be 2000 rds to ship + 5.00 added to Residental orders)

Thanks
bushmaster225 is offline  
Old June 20, 2002, 11:34 PM   #2
cheygriz
Senior Member
 
Join Date: May 11, 2002
Location: high up in the rockies
Posts: 2,232
If you want to load full power, HS-6 is hard to beat. For lower pressure loads Titegroup is good.
__________________
If you think a mighty military force is expensive, wait 'til you see what a weak one costs.
cheygriz is offline  
Old June 21, 2002, 07:40 AM   #3
Master Blaster
Senior Member
 
Join Date: October 11, 1999
Location: One of the original 13 Colonies
Posts: 2,027
I have used the berry's with 4.0 grains of titegroup as a target load. It works very well and shoots accurately out of my g-26, and my 92 compact. Max is Ithink 4.5 with a reported velocity of 1150 out of a 4" barrel.
__________________
The difference between Democrats and Republicans is like the difference between a poop sandwich, and a poop Sandwich with mustard.
Master Blaster is offline  
Old June 21, 2002, 07:53 AM   #4
griz
Senior Member
 
Join Date: July 31, 2000
Location: Middle Peninsula, VA
Posts: 1,433
Assuming you’re talking about 9 mm. I've been using Titegroup for all plinking loads and it works fine. It is consistent and clean burning in 9, 45, 38 and 44. Standardizing on Titegroup was an attempt to reduce the number of powders I have on hand. Since it worked great in the cowboy loads I was using I tried it on everything.

For loads that are close to max I have used AA#7 for a good while. It gives good velocity and comes close to filling up the case. Of course it uses about twice as much powder per load.

Another powder that is supposed to be good in 9 mm is Power Pistol. I bought a pound because of a recommendation by a fellow TFLer (best velocity) but haven’t had a chance to even open the can yet.

Of the bullets you listed I've only tried Rainer so I don't have a basis for comparison.
griz is offline  
Old June 21, 2002, 09:48 AM   #5
tonyz
Senior Member
 
Join Date: January 29, 2000
Location: Wa
Posts: 922
For your Copper Plated Bullets, Use the West Coast 46.00 Free ship. If you can find some people to make up a larger order about 5000 there prices come down a good deal. West Coast also has the thickest plating and are all Dbl struck. I use there 124FP For my 9MM.

As far as a powder goes if you like W231 for your 45 ACP and want to stay with one powder it works great in 9MM. Here are a couple of my pet loads.

124 FP West Coast 4.2Gr W231 OAL 1.070 Lee Crimp Die
124 XTP Hornady Bullet 4.5 W231 OAL 1.120 Lee Die ( Match Grade) This is a max load

Tony

PS. here are some web sights with good loading data.

http://www.loadyourown.com/loaddata/default.asp

http://www.reloadammo.com/

http://stevespages.com/page8a.htm
__________________
Nothing Ventured Nothing Gained

Last edited by tonyz; June 21, 2002 at 10:16 AM.
tonyz is offline  
Old June 22, 2002, 08:14 AM   #6
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,237
POOP

HS6, OAL 1.145-1.160", Power Pistol IS very very good in 9mm, Rainier 9mm bullets work superbly at any price.
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:26 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07634 seconds with 7 queries