Stevens 311A 12ga Side-by-side

BrianF-Jax · September 29, 2000, 12:03 AM

My dad has a Stevens 311A that he inherited from my Grandfather. Its a gun they used for hunting and such together when he was a kid.

It's in very good condition for its age. Probably isn't worth much except to him of course.

Anyway, to the point..

He can't remember how you remove the barrel(s) for cleaning. He thought it involved pushing the release switch over in one direction and yanking on the barrel, but we haven't got it to come off yet. Can anyone tell me how to get this bugger apart?

Also, the recoil pad on it is cracked/worn out, he'd like to replace it. Can anyone recommend one that fits on and fits the countour of the stock properly? Will one of these Pachmayr Deluxes from the MidWay USA Catalog do it? Just measure and get the closest one? (Never bought a screw-on recoil pad before...)

Thanks as always,

-Brian

Dave McC · September 29, 2000, 06:15 AM

First make sure it's unloaded, then...

With the action closed, remove the forearm. Most 311s of age just need one to pull on the forearm tip and it will come off.Otherwise, operate the release or unscrew the screw. Then, open the action and as it hinges open lift the bbls out of the receiver. Reverse to assemble.

Harley Nolden · September 29, 2000, 08:34 AM

BrianF-JAX:

I have sent, by separate email, the assem/disassem of the 311. Hope this will helf.

Harley's Firearms Institute of Research.

HJN

BrianF-Jax · September 29, 2000, 10:58 AM

Dave: Thanks for the short of it.

Harley: Thanks for the long of it!

-Brian

September 29, 2000, 12:03 AM	#1
BrianF-Jax Member Join Date: June 18, 2000 Location: Jacksonville, FL, USA Posts: 53	My dad has a Stevens 311A that he inherited from my Grandfather. Its a gun they used for hunting and such together when he was a kid. It's in very good condition for its age. Probably isn't worth much except to him of course. Anyway, to the point.. He can't remember how you remove the barrel(s) for cleaning. He thought it involved pushing the release switch over in one direction and yanking on the barrel, but we haven't got it to come off yet. Can anyone tell me how to get this bugger apart? Also, the recoil pad on it is cracked/worn out, he'd like to replace it. Can anyone recommend one that fits on and fits the countour of the stock properly? Will one of these Pachmayr Deluxes from the MidWay USA Catalog do it? Just measure and get the closest one? (Never bought a screw-on recoil pad before...) Thanks as always, -Brian

September 29, 2000, 06:15 AM	#2
Dave McC Staff In Memoriam Join Date: October 14, 1999 Location: Columbia, Md, USA Posts: 8,831	First make sure it's unloaded, then... With the action closed, remove the forearm. Most 311s of age just need one to pull on the forearm tip and it will come off.Otherwise, operate the release or unscrew the screw. Then, open the action and as it hinges open lift the bbls out of the receiver. Reverse to assemble.

September 29, 2000, 08:34 AM	#3
Harley Nolden Staff In Memoriam Join Date: January 8, 1999 Location: Brunswick,GA USA Posts: 1,884	BrianF-JAX: I have sent, by separate email, the assem/disassem of the 311. Hope this will helf. Harley's Firearms Institute of Research. HJN

September 29, 2000, 10:58 AM	#4
BrianF-Jax Member Join Date: June 18, 2000 Location: Jacksonville, FL, USA Posts: 53	Dave: Thanks for the short of it. Harley: Thanks for the long of it! -Brian