Remington 1100 Recoil Pad recomendations

Maka · June 9, 2000, 10:41 PM

I would like to get some recomendations for a recoil pad for a Remington 1100 20ga. Mostly shooting clays with ocassional dove hunting. Would like something that will go on with the minimal amount of fuss, but not just a slip on. Should I get a prefit one or get one that needs fitting and triming?
Thanks
Tony

PJR · June 10, 2000, 09:32 AM

Kick-eez pads are about the best on the market but they need to be properly fitted. I've found the "pre-fits" often don't fit precisely.

K80Geoff · June 10, 2000, 12:16 PM

I second the nomination for Kick eze pads. they are worth the trouble of having them fitted by a competent gunsmith.

Geoff Ross

Dave McC · June 11, 2000, 09:31 AM

I strongly recommend getting one fitted, to both the 1100 and thee. Since it needs to be done anyway, go ahead and do it right. Get a smith that understands shotgun fit and have that stock done just the right length for YOU. And, depending on your build, the smith can also add or subtract a little pitch to make shooting a bit mo' comfortable...

And this doesn't have to break the bank. A decent Pachmayr pad fitted to the weapon will run less than dinner for two at a mediocre restaurant.

Erick Gelhaus · June 11, 2000, 01:40 PM

Concur with Dave, a fitted Pachmyer De-Cellerator is a wonderful thing.

Erick

Maka · June 12, 2000, 11:44 AM

Out of curiosity how much are you guys paying for a fitted recoil pad. I was quoted about $75 installed, $45 of it is labor.
Another question while I have you attention, on the same Remington 1100. How often or how do you know if it is time to change the piston or o-ring on the gun.

Dave McC · June 12, 2000, 01:39 PM

That price sounds about right,Maka. As for the O ring,it's not expensive, so if you don't know the mileage,pop in a new one.

I've little experience with semi autos, but if the hullls are getting sent farther and farther on ejection, it's time for some replacement parts...

Maka · June 12, 2000, 03:39 PM

What about the piston?
What is actually happening if the shells are going farther? Wouldn't that mean the action is opening faster or with more force? Wouldn't that mean the o-ring and piston are sealing better? This is the first auto shotgun for me, so I need a little educating.
Thanks
Tony

cjb · June 12, 2000, 04:49 PM

We install Decellerators for $45.00 pad n' all. But all gunsmiths are different. I replace the O ring in my guns every year. But I shoot clays with them ALOT! I replaced the piston in all 3 guns last year, and will probably do the same next year. I agree that since you don't know how many rounds you have shot, It won't hurt to replace them. Besides, Remington has updated the piston system a few times over the years, if you have a older gun, you will probably want the new system. It is supposed to be more reliable. But I have never had any problems with my 1100's. JUST KEEP EM CLEAN, AND LUBED. They are great guns!
CJB

------------------
" I SHOOT BACK! "

June 9, 2000, 10:41 PM	#1
Maka Member Join Date: May 23, 2000 Posts: 35	I would like to get some recomendations for a recoil pad for a Remington 1100 20ga. Mostly shooting clays with ocassional dove hunting. Would like something that will go on with the minimal amount of fuss, but not just a slip on. Should I get a prefit one or get one that needs fitting and triming? Thanks Tony

June 10, 2000, 09:32 AM	#2
PJR Senior Member Join Date: June 1, 2000 Posts: 1,129	Kick-eez pads are about the best on the market but they need to be properly fitted. I've found the "pre-fits" often don't fit precisely.

June 10, 2000, 12:16 PM	#3
K80Geoff Senior Member Join Date: December 20, 1998 Location: NE Pennsylvania Posts: 3,641	I second the nomination for Kick eze pads. they are worth the trouble of having them fitted by a competent gunsmith. Geoff Ross

June 11, 2000, 09:31 AM	#4
Dave McC Staff In Memoriam Join Date: October 14, 1999 Location: Columbia, Md, USA Posts: 8,831	I strongly recommend getting one fitted, to both the 1100 and thee. Since it needs to be done anyway, go ahead and do it right. Get a smith that understands shotgun fit and have that stock done just the right length for YOU. And, depending on your build, the smith can also add or subtract a little pitch to make shooting a bit mo' comfortable... And this doesn't have to break the bank. A decent Pachmayr pad fitted to the weapon will run less than dinner for two at a mediocre restaurant.

June 11, 2000, 01:40 PM	#5
Erick Gelhaus Staff Emeritus Join Date: October 28, 1998 Location: Northern CA Posts: 2,750	Concur with Dave, a fitted Pachmyer De-Cellerator is a wonderful thing. Erick

June 12, 2000, 11:44 AM	#6
Maka Member Join Date: May 23, 2000 Posts: 35	Out of curiosity how much are you guys paying for a fitted recoil pad. I was quoted about $75 installed, $45 of it is labor. Another question while I have you attention, on the same Remington 1100. How often or how do you know if it is time to change the piston or o-ring on the gun.

June 12, 2000, 01:39 PM	#7
Dave McC Staff In Memoriam Join Date: October 14, 1999 Location: Columbia, Md, USA Posts: 8,831	That price sounds about right,Maka. As for the O ring,it's not expensive, so if you don't know the mileage,pop in a new one. I've little experience with semi autos, but if the hullls are getting sent farther and farther on ejection, it's time for some replacement parts...

June 12, 2000, 03:39 PM	#8
Maka Member Join Date: May 23, 2000 Posts: 35	What about the piston? What is actually happening if the shells are going farther? Wouldn't that mean the action is opening faster or with more force? Wouldn't that mean the o-ring and piston are sealing better? This is the first auto shotgun for me, so I need a little educating. Thanks Tony

June 12, 2000, 04:49 PM	#9
cjb Senior Member Join Date: January 27, 2000 Posts: 265	We install Decellerators for $45.00 pad n' all. But all gunsmiths are different. I replace the O ring in my guns every year. But I shoot clays with them ALOT! I replaced the piston in all 3 guns last year, and will probably do the same next year. I agree that since you don't know how many rounds you have shot, It won't hurt to replace them. Besides, Remington has updated the piston system a few times over the years, if you have a older gun, you will probably want the new system. It is supposed to be more reliable. But I have never had any problems with my 1100's. JUST KEEP EM CLEAN, AND LUBED. They are great guns! CJB ------------------ " I SHOOT BACK! "