The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old April 17, 2002, 01:37 PM   #1
Parke1
Senior Member
 
Join Date: June 24, 2000
Location: Bowling Green, Ohio
Posts: 136
Knife sharpening systems?

Ok, here goes. I've got a Firestone wheel-type sharpening system now, but it's getting worn out (the stones are getting smooth and chipped).

The firestone worked really well, but wore out way too fast. Soooo, in your experience, what is the best type of sharpening system out there that poses a harmony of performance, ease of use, and affordability?

Any links for places to buy 'em?

Thanks!
-Parke1
__________________
NRA Life Member
Parke1 is offline  
Old April 17, 2002, 04:24 PM   #2
Byron Quick
Staff In Memoriam
 
Join Date: November 13, 1998
Location: Waynesboro, Georgia, USA
Posts: 2,361
Do a search here. Based on what I read in previous posts, I bought the Spyderco system. I've been very pleased with it.
Byron Quick is offline  
Old April 17, 2002, 04:55 PM   #3
Byron Quick
Staff In Memoriam
 
Join Date: November 13, 1998
Location: Waynesboro, Georgia, USA
Posts: 2,361
Hmm. I just tried the search function and couldn't find a thing using Spyderco, sharpening, or Spyderco and sharpening. I remember the thread though. It was Rich Lucibella's comments on the Spyderco system that decided me.
Byron Quick is offline  
Old April 17, 2002, 10:09 PM   #4
Coronach
Senior Member
 
Join Date: March 25, 1999
Posts: 3,147
two with which I am familiar are the Lansky Sharpener and the Spyderco Sharpmaker.

Lansky: A metal bracket that clamps to the blade, and set of stones with rods that slip through the bracket. The bracket has a series of holes that allow you to use the stones at four different and exact angles, for varying degrees of sharpness/durability. The only drawback of the Lansky rig that I can see (I'm no expert) is that it is not really possible to sharpen a recurved, serrated or very long blade with the rig.

Spyderco Sharpmaker: a plastic base with holes for triangular stones. You hold the knife upright and slide it over the stones (I'm not explaining this well). It is very easy to do, and can be used on the blade types that the Lansky cannot.

If I had to buy one, it would be the Sharpmaker. The Lansky can do more blade angles, and is therefore more useful in that sense, but the Sharpmaker is much easier to use and can do more blade types.

Of course, they're both inexpensive, so you an just buy both.

Mike
__________________
The axe bites into the door, ripping a hole in one panel. The maniac puts his face into the hole, cackling gleefully, "Here's Johnny...erk."
"And here's Smith and Wesson," murmurs Coronach, Mozambiquing six rounds of .357 into the critter at a range of three feet. -Lawdog

"True pacifism is the finest form of manliness. But if a man comes up to you and cuts your hand off, you don't just offer him the other one. Not if you want to go on playing the piano, you don't." -Sam Peckinpah

"A human being should be able to change a diaper, plan an invasion, butcher a hog, conn a ship, design a building, write a sonnet, balance accounts, build a wall, set a bone, comfort the dying, take orders, give orders, cooperate, act alone, solve equations, analyze a new problem, pitch manure, program a computer, cook a tasty meal, fight efficiently, die gallantly. Specialization is for insects." -Robert Heinlein
Coronach is offline  
Old April 17, 2002, 11:50 PM   #5
deputy tom
Senior Member
 
Join Date: February 28, 2002
Location: pgh.pa.u.s.a.
Posts: 711
Ditto what coronach said. You can find postings on this subject in www.bladeforums.com or www.knifeforums.com. tom.
__________________
N.R.A.LIFE MEMBER
Thank Goodness we're back on line.

An end will come on the world, but love and music will endure.
Thig crioch air an t-saoghail, ach mairidh gaol 's ceol.
Old Scottish Gaelic proverb
deputy tom is offline  
Old April 18, 2002, 07:52 PM   #6
Jack Carson
Senior Member
 
Join Date: July 13, 2001
Location: Central Oklahoma
Posts: 275
For most blades opt for the Spyderco!

I've had mine for over 15 years and it's still the best system I've owned. Having said that, two years ago my wife bought me a Henckel chef's knife that is the devil's own step-mother to sharpen. A few weeks ago I borrowed my Dad's Lansky sharpener and it sharpened that sucker to a razor's edge in about 15 minutes.

There are optional sharpening stones with the Lansky system that are reported to sharpen serrated blades very well. They are triangular in shape like the Spyderco system. As mentioned earlier, both Spyderco and Lansky are inexpensive so you could afford both in need be.

90 percent of my sharpening needs are met by the Spyderco but I plan on buying my own Lansky just as soon as Dad wants his back!
Jack
__________________
Jack C.
Jack Carson is offline  
Old April 19, 2002, 10:36 AM   #7
Mikul
Senior Member
 
Join Date: March 21, 2000
Posts: 1,396
The Spyderco is a nice system and handles my kitchen knives and Swiss Army knife quite easily, but the stones that some with it are too fine for my ATS-34 blades.

Get a good low grit stone if you have hard blades. I've been using an 80 grit stone like the one on this page:
http://www.thejapanwoodworkercatalog...g8/p/057f.html
__________________
There are two types of men: those with guns, and those at their mercy.
Mikul is offline  
Old April 21, 2002, 06:49 PM   #8
Navy joe
Senior Member
 
Join Date: January 28, 2001
Location: VA, USA
Posts: 1,803
Lansky, but don't substitute a system for a skill, I most often find myself using the lansky stones by themselves or a DMT diamond matrix stone. Can use Chef's steel, barbers strop(and/or side of boot). The Spyderco Native sees one thing only and thats the bottom of my favorite coffee mug and then I strop it on my boot. Sharp beyond belief.

I use the whole Lansky set-up only when restoring a blade that someone else abused beyond recognition. For serrated blades I just have a little diamond stick
__________________
FY47012
Navy joe is offline  
Old April 22, 2002, 10:15 AM   #9
3 gun
Senior Member
 
Join Date: December 23, 1999
Location: N41 24.283 W81 43.370 N.E.Ohio
Posts: 557
I have the Lansky 5 stone kit. Works great on up to 6" blades. Shaving sharp on any blade I've tried it on. Even brought a couple of "trashed" workbench blades back to razor sharp. I added the serrated stone to the kit to cover everything I own. The kit is a little large to travel "in the field" so I have a small set of cermaic sticks for the pack. I just use the Lansky system at the same angle as the sticks on my field blades. Keeps life simple.
__________________
Change you can believe in... Pre-65 US silver coins
NRA RSO & Certified Instructor in rifle, pistol, shotgun.
An unloaded pistol is a paperweight.
Opportunity knocks..Trouble kicks down the door.
3 gun is offline  
Old April 22, 2002, 01:14 PM   #10
Gino
Senior Member
 
Join Date: October 14, 1998
Location: WPB, FL USA
Posts: 911
I bought a Spyderco Sharpmaker from www. knifeworks.com a couple of months ago. Cost was just under $50 shipped. So far I'm impressed. The thing has been able to sharpen all of my knves with ease.
Gino is offline  
Old April 23, 2002, 11:54 AM   #11
JWC in MS
Member
 
Join Date: January 14, 2002
Location: Tupelo, Ms.
Posts: 69
I have used the Lansky for years and would say I am 90% satisfied.
I have not been able to sharpen blades that have constant taper from the back(top) of the blade to the edge. Those that have a parrallel non-taper can easily be brought to a razors edge.
JWC in MS is offline  
Old April 23, 2002, 01:31 PM   #12
Nanaimo Barr
Senior Member
 
Join Date: May 4, 2001
Location: North Idaho
Posts: 1,024
ok, question, when ever I try to sharpen a blade with a stone I end up screwing it up because I can't maintain the angle. does either of these systems deal with that?
__________________
"Question that Regulation, you might be suprised to find out it's Illegal"
Nanaimo Barr is offline  
Old April 23, 2002, 05:33 PM   #13
JWC in MS
Member
 
Join Date: January 14, 2002
Location: Tupelo, Ms.
Posts: 69
Nanaino Barr
Never think you are the only one who has this trouble. The key to sharpening a knife is keeping the angle between blade and stone the same. Sounds pretty simple, but it ain't!!
I have no experience with the Spyderco, but the Lanskey can and does maintain the same angle on most knives. If the blade has a "flat" that the clamp can grip and not move it is simple to get a razor type ecge.
JWC in MS is offline  
Old April 23, 2002, 05:38 PM   #14
OF
Senior Member
 
Join Date: April 11, 2000
Posts: 2,239
I have the Spydie system and it's great. You can get it at www.onestopknifeshop.com also.

- Gabe
OF is offline  
Old April 24, 2002, 12:57 AM   #15
Nanaimo Barr
Senior Member
 
Join Date: May 4, 2001
Location: North Idaho
Posts: 1,024
I think I see a lansky in my furture.. does the spyderco have anything similar?
__________________
"Question that Regulation, you might be suprised to find out it's Illegal"
Nanaimo Barr is offline  
Old April 24, 2002, 02:14 AM   #16
444
Senior Member
 
Join Date: November 20, 2000
Location: Ohio
Posts: 3,727
I have the Lansky. My set came with a triangular stone for sharpening serrated blades. I have only used it a couple times and it seemed to work OK-I don't own any serrated blades myself. I have also used the Lansky on long blades, you just have to move the clamp which of course takes a lot more time. I also purchased a stone that is more coarse than the ones in the set for blades that have been badly abused or when the factory made no attempt to sharpen it, and a finer stone than the ones in the kit to try to get a little extra sharpness. In addition I bought a razor strop for the finishing touch.
__________________
You know the rest. In the books you have read
How the British Regulars fired and fled,
How the farmers gave them ball for ball,
From behind each fence and farmyard wall,
Chasing the redcoats down the lane,
Then crossing the fields to emerge again
Under the trees at the turn of the road,
And only pausing to fire and load.
444 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09388 seconds with 7 queries