The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > NFA Guns and Gear

Reply
 
Thread Tools
Old April 7, 2002, 11:28 AM   #1
Riss
Senior Member
 
Join Date: February 14, 1999
Location: Eastern, PA, USA
Posts: 147
Anyone havepics of Suppressed Ruder MkII .22

Looking for pics of the parts to attach a can to a MKII. Looking to have one built by my Class 2. Even good pics of the MK II taken apart would help.
__________________
An X is still an X with a Quarter Inch group at 100 yards
With a Quarter Inch Group on the keyboard an X could be - Z,S,D, or C.
I am a quarter inch typist - Please excuse the errors!
Riss is offline  
Old April 8, 2002, 12:10 PM   #2
ctdonath
Senior Member
 
Join Date: April 11, 1999
Posts: 1,902
Every picture I've seen has the suppressor integral to the barrel. It just looks like a bull-barrel Mk II.
ctdonath is offline  
Old April 9, 2002, 05:35 PM   #3
The Rock
Senior Member
 
Join Date: September 13, 1999
Location: Occupied VA, CSA
Posts: 351
You thread the barrel or make some sort of a QD catch involving springs and pins or spings and blind notches.

Easiest is threads for on and off, usually. The Gemtech system that is QD is pretty tight tho..

TR
__________________
Molon Labe!
Will YOU stand with ME?
The Rock is offline  
Old April 9, 2002, 05:45 PM   #4
Ledbetter
Senior Member
 
Join Date: February 23, 2000
Location: California USA
Posts: 4,535
For educational purposes only

Mark White has written a book on suppressors made of common home materials like pvc pipe and soft drink cans. He treats the Mk II at length. There are many photographs. He is the same guy who wrote the leading 10/22 resource book.

Regards, and don't blame me if you get caught doing something you shouldn't.
Ledbetter is offline  
Old April 9, 2002, 05:55 PM   #5
Riss
Senior Member
 
Join Date: February 14, 1999
Location: Eastern, PA, USA
Posts: 147
Actually looking even for pics of how the stock gun is put together. Don't worry about me. I have an FFL and am also working with others to redesign some of the more commonly found suppressed guns. Most manufacturers are likewise reluctant to release their designs in fear of being copied without permission. I only want to build off their design and improve it.
__________________
An X is still an X with a Quarter Inch group at 100 yards
With a Quarter Inch Group on the keyboard an X could be - Z,S,D, or C.
I am a quarter inch typist - Please excuse the errors!
Riss is offline  
Old April 10, 2002, 04:58 AM   #6
UltimaThule
Senior Member
 
Join Date: September 16, 2001
Location: Norway
Posts: 458
Here are two ways of attaching a can. The way it is done on the Ruger obviously requiers the muzzle to be re-crowned, and you loose a half inch or so of the effective barrel length. It's also important to actually use the protective nut when the can is not attached, otherwise the threads will fill up with dirt and lead particles.

I'm very happy with mine, the gun is not altered in any significant way when not suppressed. The long can at the end of the barrel changes the balance a bit, but it's surprisingly easy to shoot well. Accuracy does not suffer, nor does point of impact change on either of my guns, but strange things may happen when you attach all that weight at the muzzel.

The one on my Ruger was made by a local gunsmith years ago, I think I paid 120 dollars or so, including the threading of the muzzel. The can on the rifle (CZ) is mass produced, and I think all the rifles imported to this country are threaded as a matter of course, "no one" buys a .22 without a suppressor anyway. I paid about 350 dollars for the CZ complete with suppressor and a scope a couple of years ago. No tax stamp, no hassel, it's great to live in a civilized country.

You may also want to go here: http://guns.connect.fi/
There are some interesting stuff about suppressors among other things. Check out the link to Reflex suppressors.
UltimaThule is offline  
Old April 10, 2002, 05:04 AM   #7
UltimaThule
Senior Member
 
Join Date: September 16, 2001
Location: Norway
Posts: 458
Looks like the server does not want to accept the attachment. I've had this problem before, I have no idea what it is. Trying again:
Attached Images
File Type: jpg suppressor.jpg (180.5 KB, 155 views)
UltimaThule is offline  
Old April 10, 2002, 06:35 AM   #8
johelin
Member
 
Join Date: December 17, 2001
Location: Finland
Posts: 52
I think that outside thread is more common, even on Ruger Mark II´s. That way it will accept standard cans (1/2" - 20 UNF thread).
johelin is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08108 seconds with 8 queries