The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old January 11, 2000, 12:10 AM   #1
Oleg Volk
Staff Alumnus
 
Join Date: December 6, 1999
Location: Nashville, TN
Posts: 7,022
After trying several 12ga pumps, I found that I couldn't deal with the recoil of slugs and buckshot. I can deal with 20ga.

Now, 12ga buckshot at close range is reputed to be Hammer of Thor. How would 20ga loads compare? Slugs are close enough to 45/70 for me to think them adequate. What about 00 or #1 buckshot?

Also, has anyone a source of inexpensive practice ammo (in 12ga S&B makes a good cheap load) in 20ga?
Oleg Volk is offline  
Old January 11, 2000, 07:18 AM   #2
Dave McC
Staff In Memoriam
 
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,812
I knew I'd see this one again. Last time I checked the stats, stopping and lethality for either were within a point of each other, regardless of gauge.

As for not handling the recoil of a 12, my experience tells me more folks suffer from form problems than inability to deal with the problems. But, to each his own, and a 20 is very effective...
Dave McC is offline  
Old January 11, 2000, 09:00 AM   #3
Al Thompson
Staff Alumnus
 
Join Date: May 2, 1999
Location: South Carolina
Posts: 3,605
There are two loads of buckshot in 20 guage. The 3 inch shells can be had with # 2 buck and the 2 3/4 with # 3 buck.

The slug works great also.

I think Massad Ayoob pointed out that the 20 seems to give about 70 % of the effectiveness of a 12 for about half the recoil.

Giz
Al Thompson is offline  
Old January 11, 2000, 11:10 AM   #4
labgrade
Member In Memoriam
 
Join Date: November 29, 1999
Location: west of a small town, CO
Posts: 4,346
Oleg, you answered your own question. A hit w/a 20's a lot more effective than a miss w/a 12.
labgrade is offline  
Old January 11, 2000, 01:36 PM   #5
Ned Roundtree
Senior Member
 
Join Date: December 8, 1999
Location: Lexington, KY,USA
Posts: 738
I will second Gizmo99's choice of #2 in 3" or #3 in 2 3/4".
Ned Roundtree is offline  
Old January 12, 2000, 02:43 PM   #6
Ewok
Junior member
 
Join Date: May 26, 1999
Posts: 380
Getting a 20ga is the cost effective way to go. An alternative is to have the barrel compensated, ala Vang Comp, and shoot reduced ("tactical") loads.

------------------
Protect your Right to Keep and Bear Arms!


Ewok is offline  
Old January 12, 2000, 03:06 PM   #7
kraMrD
Member
 
Join Date: July 1, 1999
Posts: 55
This will sound like I'm way off in left field... but...

Does anyone make any kind of reusable adapter that you could put a 20ga shell into which would make it larger to function like a 12ga shell? This way you could load 20ga rounds into your 12ga for practice and also load with 12ga for when it counts.

M.
kraMrD is offline  
Old January 14, 2000, 06:14 PM   #8
Pierre
Senior Member
 
Join Date: January 10, 2000
Location: Lost Prairie Montana
Posts: 106
kraMRd:...why not simply download your 12ga using 7/8 of 7.5 or 8 with the appropriate charge?? No real need to load your 12ga to the max. Works great for shooting clays! (Which we do)
Pierre is offline  
Old January 15, 2000, 05:04 PM   #9
FireForged
Senior Member
 
Join Date: November 4, 1999
Location: Rebel South USA
Posts: 1,186
A 20ga for home defense is "perfect", I only bought a 12 ga because I would have had to order the 20 and wait 2 weeks for it to come in.

Mossberg 500 Persuader 12ga
Ammo: #1 Buck #4 Turkey
FireForged is offline  
Old January 20, 2000, 12:48 PM   #10
DorGunR
Senior Member
 
Join Date: January 13, 2000
Location: Maryland
Posts: 1,125
kraMrD
Briley makes SS full tube inserts that are very good. I have a 12ga O/U and have inserts for this gun in 20ga, 28ga and .410ga.
The barrels had to be sent to Briley to be properly fitted. Don't know if this can be done for sem-auto and pump guns. However you can check this out at their website. http://www.briley.com/

------------------
C.A.V.U.
DorGunR is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:50 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07540 seconds with 7 queries