The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Competition Shooting

Reply
 
Thread Tools
Old March 25, 2002, 11:44 PM   #1
SHOCK
Member
 
Join Date: October 31, 2001
Location: Philippines
Posts: 19
Which 1911 is best for IPSC Standard Division?

I prefer 1911 style pistols because here in our place, they are the only kind of pistol that has available parts.
__________________
Shoot now, Shoot later, Shoot again, and ask questions when everyone is dead.

Diligentia, Vis, Celaritas
Accuracy, Power, Speed
SHOCK is offline  
Old March 26, 2002, 12:45 AM   #2
Navy joe
Senior Member
 
Join Date: January 28, 2001
Location: VA, USA
Posts: 1,803
Any one that goes bang every time. I assume you mean limited-10 class, ten round mags and iron sights. Get good mags and practice. I saw too many people yesterday that couldn't make their gun function. Personally I was doing my poor shooting with a 57 yr old USGI gun that was way more up to the task than I was. Only mods are sights, trigger, ambi since I'm a lefty and Wilson mags. I'll say it again, Wilson mags! Get a steel basepad, they don't break and the mag drops nicer and lands on the basepad.
__________________
FY47012
Navy joe is offline  
Old March 26, 2002, 01:07 AM   #3
SHOCK
Member
 
Join Date: October 31, 2001
Location: Philippines
Posts: 19
no not limited-10 class. I think the standard class in IPSC is called limited class in USPSA.

This is the criteria:

Standard Division
Major power factor floor 170
Minor power factor floor 125
Minimum bullet weight No
Minimum bullet caliber 9 mm
Maximum pistol weight No
Minimum trigger pull No
Magazine length restrictions See Box
Magazine capacity restrictions No
50 mm from the body or torso Yes
Move ladies belt loops Yes
Compensators No
Ports No
Optics No
Fit in box Yes, with magazine inserted
.40 minimum caliber for major Yes
Specific holster position Yes
Modifications allowed Yes
Production guns only No


Minimum caliber for firearms is 9mm.
Minimum caliber for major power factor is 10 mm (.40 inches).
Any complete handgun or components produced by a factory and available to the general public.
Prototypes are specifically not allowed.
Changing caliber from the factory standard is specifically not allowed.
Electronic sights, or optical sights (one or more lenses with a diameter greater than 9.5mm), porting of barrels or compensators are specifically not allowed.
External modifications such as weights, or devices to control or reduce recoil are specifically not allowed.
External modifications which are specifically allowed:
Replacement of slides, provided the replacement slide profiles the factory standard.
Replacement of sights with metal sights.
Replacement of safeties. Ambidextrous safeties are approved.
Replacement beavertail grip safeties are approved.
Replacement of hammers.
Replacement of magazine release buttons.
Replacement of slide stops.
Enlargement of ejection ports.
Enlargement or replacement of magazine wells.
Checkering of frames.
Alteration of grip safety and grip tang.
Cosmetic enhancements that do not give a competitive advantage such as custom grips, plating, etc.
Internal modifications to improve accuracy, reliability, and function, are allowed, e.g. replacement barrels.
Any unloaded handgun in its ready condition with magazines inserted must fit within the confines of a box with the dimensions of 225 mm x 150 mm x 45 mm (tolerance of +1 mm, -0 mm).
The holster and allied equipment i.e., speed loaders and magazine pouches, must comply with existing rules and must be worn behind the anterior superior spina iliaca or the highest, most forward point on the pelvic girdle. The maximum inside distance of the handgun and equipment may not be more than 50 mm from the competitor's torso while standing relaxed. Range Master may use reasonable discretion.
__________________
Shoot now, Shoot later, Shoot again, and ask questions when everyone is dead.

Diligentia, Vis, Celaritas
Accuracy, Power, Speed
SHOCK is offline  
Old March 26, 2002, 07:35 PM   #4
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,270
MORE IMPORTANT

How much are you willing to spend?
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old March 26, 2002, 10:19 PM   #5
vetts1911
Member
 
Join Date: March 26, 2002
Location: MARYLAND
Posts: 65
If you want a 1911 to start with Springfeild Loaded or a Para Limited are good ways to go. Dawson Precision has a enhanced model race ready of the Para-14 or 16. The Para is real easy to find hi-caps for limited. If you have a bigger cash flow SVI and STI make great limited guns. The STI Edge is ready for limited. I would take the advice about the mags. Make sure you go factory and for the single stack Wilson is hard to beat.
vetts1911 is offline  
Old March 27, 2002, 12:06 PM   #6
Hemphill
Senior Member
 
Join Date: April 20, 1999
Location: Reno, NV, USA
Posts: 116
Shock, Jonny Lim just opened a Limcat shop in Cebu. He makes some of the best IPSC pistols. He mainly uses the STI/SV high capacity 1911 pistols. Check out www.limcat.com . I just ordered one of his limited guns yesterday from his shop in Reno, Nevada.
Hemphill is offline  
Old April 1, 2002, 07:06 PM   #7
grassy knoll
Member
 
Join Date: January 24, 2002
Location: Kanuckistan
Posts: 19
from what i have seen, the most popular are the Para Ordnance 16-40 Ltd, with a bit of tuning (trigger, sights, magwell, aluminum mag base pads, tungsten guide rod, pinned grip safety, and skateboard tape)

and from there most guys will go to a bull barrel and more...
__________________
Ditto
grassy knoll is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07254 seconds with 7 queries