Disassembly of Savage 110 Bolt

Bogie · March 25, 2002, 05:38 PM

Okay - It's two 110s and a 12, but shouldn't me much different...

I'm used to pulling the firing pin assembly from my Panda's bolt (Kleindorst tool) to adjust my sizing dies for minimal headspace resizing (just "feeling" the case in the chamber when the bolt is closed), and I'd like to do the same with my Savages... I've got three Savages, and two have hex screws in the back, and one a "regular" screw. Tried a big-bleep hex wrench, and thought I'd strain myself - the sucker didn't even budge... Any suggestions?

Or can't one do this sorta thing with the Savage?

George Stringer · March 26, 2002, 08:12 AM

Bogie, I sent you the instructions. George

**James K** · March 26, 2002, 09:20 PM

Hi, George and Bogie,

George, I am sure he will appreciate your help. I started to reply on this one and then decided that disassembling a Model 110 bolt is a lot like another type of human activity, you can either do it or you can't. And if you can't, it is da*n near impossible to give instructions.

Jim

TackEmIn · November 1, 2005, 11:09 AM

How bout it fellas...... I would like the same instructions to take apart the savage bolt.... any way to get them??? Wade

medic13 · November 10, 2006, 11:23 PM

does any one have the instructions and cleaning instructions cannot find them online anywear. thanks

March 25, 2002, 05:38 PM	#1
Bogie Senior Member Join Date: June 6, 2000 Location: Job hunting on the road... Posts: 3,828	Disassembly of Savage 110 Bolt Okay - It's two 110s and a 12, but shouldn't me much different... I'm used to pulling the firing pin assembly from my Panda's bolt (Kleindorst tool) to adjust my sizing dies for minimal headspace resizing (just "feeling" the case in the chamber when the bolt is closed), and I'd like to do the same with my Savages... I've got three Savages, and two have hex screws in the back, and one a "regular" screw. Tried a big-bleep hex wrench, and thought I'd strain myself - the sucker didn't even budge... Any suggestions? Or can't one do this sorta thing with the Savage? __________________ Job hunting, but helping a friend out at www.vikingmachineusa.com - and learning the finer aspects of becoming a precision machinist. And making the world's greatest bottle openers!

March 26, 2002, 09:20 PM	#3
James K Staff Join Date: March 17, 1999 Posts: 16,428	Hi, George and Bogie, George, I am sure he will appreciate your help. I started to reply on this one and then decided that disassembling a Model 110 bolt is a lot like another type of human activity, you can either do it or you can't. And if you can't, it is da*n near impossible to give instructions. Jim __________________ Jim K

November 1, 2005, 11:09 AM	#4
TackEmIn Junior Member Join Date: November 1, 2005 Posts: 1	savage bolt How bout it fellas...... I would like the same instructions to take apart the savage bolt.... any way to get them??? Wade

November 10, 2006, 11:23 PM	#5
medic13 Junior Member Join Date: November 10, 2006 Posts: 3	savage 110 disassembly does any one have the instructions and cleaning instructions cannot find them online anywear. thanks

March 26, 2002, 08:12 AM	#2
George Stringer Staff Alumnus Join Date: October 12, 1998 Location: Earlington KY Posts: 2,299	Bogie, I sent you the instructions. George