The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 23, 2002, 05:05 AM   #1
Redhook
Senior Member
 
Join Date: January 25, 2001
Posts: 254
Mixed brass, headspacing, and resizing; what would you do?

My friend and I have been collecting our Fed GMM brass in .308 for the last two years in anticipation of reloading it some day. Well the day has come and, not knowing better, we've mixed and tumbled our brass together.

The brass only comes from two rifles, a Rem 700PSS and a Blaser LRS2, in approximately equal amounts. Using an RCBS "Precision Mic" tool (see my "Precision Mic" post as well), I have old Remington Brass that I know is mine and is headspace measured to +.002" to +.003" ANSI minimum. The new Federal Ammo headspace measures -.003 ANSI min. Unfortunately, out of the 1000rds of Fed brass, less than 1/20 of that is as long as the Remington.

The first 500rds that we tumbled is brass from 12mos to 6mos ago and we got a 50/50 split of brass that was -.002" to 0 (assumed Blaser) and 0" to +.003 (assumed PSS).

Unfortunately, when we tumbled the last 500rds from the last six months, 95% of the brass is between -.002 and 0 ANSI min. We both know that we've shot one for one in the last six months.

So, what would you do? Do we attempt to segragate the brass or just FL size it back to -.003" and start over? Any other ideas?

-Red-
Redhook is offline  
Old February 23, 2002, 05:29 AM   #2
DAVID NANCARROW
Senior Member
 
Join Date: November 5, 2000
Location: TEXAS
Posts: 1,479
Fastest way would be to full length resize all of it.
DAVID NANCARROW is offline  
Old February 23, 2002, 06:38 AM   #3
bedlamite
Senior Member
 
Join Date: August 10, 2000
Location: WI
Posts: 1,026
FL resize and trim all of it, then sort by weight.
__________________
A plan is just a list of things that doesn't happen.
bedlamite is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07121 seconds with 7 queries