The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old August 2, 1999, 11:53 AM   #1
Gunga Din
Junior Member
 
Join Date: August 1, 1999
Posts: 3
Just purchased a new 590 and does not seem to feed properly when I pump then the action during rapid or slow fire sometimes it misses a round and the round falls out the bottom. Im not short stroking the weapon and I have used all types of ammo I just seems to me maybe the action is out of wack or something, but it does not happen all the time. Just wondering if ther is a quick fix or if I should send it back to Mossberg.
Thanks in advance
Gunga Din is offline  
Old August 2, 1999, 09:41 PM   #2
hksigwalther
Senior Member
 
Join Date: November 18, 1998
Location: NE OH, USA
Posts: 3,198
Hmm. This is a wierd one. What releases the next round from the magazine when the action is pumped is the carrier. It pushes the left side retainer or stop or whatever the heck that claw like part is called to the side which lets the round out of the mag and onto the carrier. So the carrier has to be in or near the down position for the round to be released. The carrier should catch it.

The only other way I can see a round falling out is if the sides of the carrier are somehow slightly bent outward or below the normal thickness and allows the cartridge to sometimes fall out if it's cocked in a particularly extreme angle (left or right) from the centerline.

Are the rounds falling out before the action is fully to the rear or after it reaches this point?

(In any case get it looked at.)

- Ron V.

------------------
hksigwalther is offline  
Old August 3, 1999, 11:39 AM   #3
Harley Nolden
Staff In Memoriam
 
Join Date: January 8, 1999
Location: Brunswick,GA USA
Posts: 1,884
GungaDin:
Try a complete disassembly and really clean it. There are preservatives on new guns and Cleaning may resolve your problem.

Don't forget to lube after cleaning.

HJN
Harley Nolden is offline  
Old August 3, 1999, 03:41 PM   #4
Gunga Din
Junior Member
 
Join Date: August 1, 1999
Posts: 3
disasembled and cleaned the firearm and now all is well for now.

thanks
Gunga Din is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:16 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05947 seconds with 7 queries