The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 16, 2002, 10:03 PM   #1
riflemanZ
Member
 
Join Date: February 16, 2002
Location: milwaukee wi
Posts: 20
45-70 cast bullets ?

I have 100 350gr hardcast bullets for my marlin 1895 and was wondering if you guys had any loads around 1500fps? These are not gas checked.They are from kansas city cast bullet co.I have RE-7,IMR-3031
and H-4198 powders on hand.How fast can i shoot non gas checked bullets? Will these lead up my barrel?
__________________
Thanks the riflemanZ NRA Member
My best friend is my 45-70!
riflemanZ is offline  
Old February 16, 2002, 11:05 PM   #2
ryucasta
Senior Member
 
Join Date: February 4, 2002
Location: Los Angeles, CA
Posts: 431
Checkout QuickLOAD Internal Ballistics software. http://www.neconos.com/
ryucasta is offline  
Old February 17, 2002, 01:27 PM   #3
LONGRIFLE30
Member
 
Join Date: February 16, 2002
Location: Wichita Falls,TX.
Posts: 49
You don't, by any chance know the exact hardness of the bullets, do you? I get non-checked bullets above 2000 fps. These are bullets I cast myself and are very hard. I use zink, among other things to get a very hard alloy. With a 350, you can get 1585 fps with 52 grains of IMR3031. You can get about 1500 fps with 40.6 grains of Re-7 or 39.4 grains of H4198. Good luck.
LONGRIFLE30 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05454 seconds with 7 queries